С200 - invalid continuation byte

[tariya-garker]

Description

Faced with the same error: 'utf-8' codec can't decode byte 0xd0 in position 4003: invalid continuation byte appears on the already added camera and if it is removed, with reboot, and add again

Reproduction Steps

probably update the camera software to 1.3.11 (the offer, since I did not notice exactly when it started)

Expected behavior

a stably working camera with its options

If applicable, add error logs.

home-assistant_tapo_control_2023-12-21T09-10-09.445Z.log

Device Firmware

1.3.11

Integration Version

5.4.12

Using stream component

Yes

Does camera work via official integrations?

N/A

Camera has all attributes filled out in developer tools

No

HASS Environment

HAOS on Proxmox (on miniPC)

Search for similar issues

Yes

Additional information

I didn’t notice exactly when it started, for some time I didn’t follow the updates, then I read in the integration description that there were errors at 1.3.9 - I decided to update, but I didn’t know that the camera already had 1.3.11 - actually from one mistake, another came out as I suppose. I tried to remove the camera and add it again - with no result I tried to delete the integration and install it again - with no result there are no restrictions for the camera on the router, it works stably in the native application, the stream also gives out in the Surveillance Station, the error appeared BEFORE adding the Surveillance Station