pyvlx

pyvlx copied to clipboard

Current position doesn't work

15

Hello. I really appreciate your work!! But I'm asking for a little help. I want to configure the automation of my pergola (with Somfy io motors/controllers). Sadly, I realized one...

andrazek

Get position while moving a cover

4

Dear all, I'm currently testing the KLF200 (Firmware 2.0.0.71) to control my 4 solar covers via Home Assisstant. I see in the Home Assistant Log (activated for Velux via configuration.yaml),...

tschevko

Different venetian blinds are 'open' at different orientation values

2

There seem to be two types of venetian blinds, one goes from -90° to + 90° (called type A from now on) another goes from 0° to 90° (called type...

dumpfheimer

Incorrect Current Orientation with Somfy Venetian Blind

70

Servus! Yesterday I started migrating my Home Assistant -> Somfy Connexoon to HA -> Velux KFL 200 which worked kind of nicely, but the "tilt position" (=orientation) was missing. So...

dumpfheimer

Support for Dual Roller Shutter

3

Support for separately positioning the upper or lower curtain of dual roller shutters added.

madzrobz

Dual Roller Shutter / Expose single curtain positions to HA

6

The "Dual Roller Shutter" has two curtains which can be controlled separately by sending FP1 or FP2 instead of MP in GW_COMMAND_SEND_REQ. MP: Position of the two curtains FP1: Position...

madzrobz

Keeping connection open freezes KLF

22

Hello, I have my connection with KLF 200 open for an infinite time (it should react any time I issue a command). However, within usually 24 hours I lose the...

werner-j

Velux component in Home Assistant does not set-up due to timeout.

5

Since I have upgraded to Home Assistant release 116 (I have skipped 115) my Velux component will simply not set-up. To me it seems like the SSL timeout was reduced...

madzrobz

Controlling ON/Off switches

2

Hi, First: Thank you for this wonderful library, it is really good with clear documented code and it works really great 👍 But as nothing is perfect, I've a problem...

TheDatadrainer

Enable GW_COMMAND_SEND_REQ to several nodes at once from HA

3

GW_COMMAND_SEND_REQ allows to send the command to more nodes at once. This could be exposed to HA cover.set_cover_position by enabling more than one entity_id to be passed (however I simply...

madzrobz