Judman

Hey all, Not running the beta, just 1.4 on a Roku Ultra 2021, but I am experiencing the same stuttering issues with some files as well. Noticed it first on...

First time setting up some parasites! Old and new airflow case version.  

@CallMeBruce Any chance of a redo for 4.6.0, since you fork seems to have stopped working?

Running into this trying to connect to Unraid 6.12.3 via SSH. ``` Sep 29 18:54:21 Tower sshd[4245]: Connection from 10.0.10.107 port 45688 on 10.0.20.30 port 22 rdomain "" Sep 29...

For those that have tried the MG Chemicals - 419D, did anyone prep the solder mask with sanding or anything? Also, what about simple exterior spray paints or something?

So I got some MG 419D-55ML because it seemed to be the most common option. I tried some like 1000 grit wet sanding to see if it would increase adhesion...

@rbaron I appreciate the guidance! I was finally able to get the soil read loop flashed and read using a cheap amazon debugger and the combo of J-link Flash lite...

My bad, the numbers above are from the bare board, here are the numbers from the coated board. xxixx | Dry | Water to line 3.30 | 545 | 424...

So something is funky. Below is my spreadsheet and the data logged from the soil test sketch. [Google Doc](https://docs.google.com/spreadsheets/d/1d_42K0qu3Gp8OTpRAFzVyzU1p_m-XuC_G8FH6hterzM/edit?usp=sharing) To make it short here are the values I changed in...

@rbaron Well I have given up on my previous coating method with with multiple coating of MG 419D-55ML. I could not get the calibration to work correctly. I am not...