JsBergbau

> > Hello, > A possible circumstance that can occur, when the signal level is not good, is that the command to change the communication interval does not correctly reach...

Up and down in Voltage is quite normal. Here the diagram of a few sensors of the last 7 days 

Hi pvvx. MiTemperature2 script sends BT packets to change connection interval and powerdraw is reduced. However sometimes on bad connection power draw rises and doesn't go back to low level...

On my sensor the last value is also `0b` Currently it is `e5 0b`. last time I checked it was `9f 0b` Current readings are ``` Temperature: 22.75 Humidity: 53...

Thanks for the info. I saw this post with supposed voltage somewhere else a few days ago and wanted to make some tests. Didn't manage yet. Yeah it seems that...

I can confirm now last to bytes are the battery voltage. Note: When measuring the battery outside the device battery level is about 0,15 V higher than displayed on the...

> > > Hi JsBergbau, when you say Aqara (product name WSDCGQ11LM) is that the same as LYWSD03MMC? > Sorry I do not understand, I thought that Aqara are Zigbee...

> Oh, and for the record, the battery level that was retrieved via polling was always 99%, even minutes before they shut down, so the battery percentage is not reliable....

Script is now updated to read battery voltage and get an estimated battery level based on the battery voltage.

Now the second battery is empty. The replaced battery seemed to be low quality. Nevertheless, interesting voltage values  A rapid drop below 2.36V, then voltage rises above 2.39 V...