API not reachable, error msg: Cannot GET /api/docs

[Schnabulation]

OS

Raspberry Pi OS (Linux magicmirror 6.6.31+rpt-rpi-2712 #1 SMP PREEMPT Debian 1:6.6.31-1+rpt1 (2024-05-29) aarch64 GNU/Linux)

NodeJS Version

v22.9.0

MagicMirror² Version

2.29.0

Remote Control Version

2.3.8

Did you try using just Remote Control alone with MM?

• [X] I have and the error still happening

Description

Brand new install of Magic Mirror using manual install on a Raspberry Pi 5.

MagicMirror and MMM-Remote-Control working flawlessly. Frontend of MagicMirror can be accessed from another machine (http://IP-of-MM:8080). Frontend of MMM-Remote-Control can be accessed from another machine (http://IP-of-MM:8080/remote.html).

However: I can not access the API endpoint. A normal GET request to http://IP-of-MM:8080/api/docs gets answered with Cannot GET /api/docs

Expected behavior

API request should be completed successfully.

Current behavior

Error message saying Cannot GET /api/docs

Possible solution

No response

Steps to reproduce

1. Start MM
2. Wait until everything starts
3. Try to open "http://IP-of-MM:8080/api/docs"

Log

Nothing in log files regarding this issue. I started 'npm logs mm' and kept watching the logs as I send above request. No new entries.

config.js

let config = {
	address: "0.0.0.0", 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror² is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: [], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "de",
	locale: "de-CH",
	// logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
    logLevel: ["WARN", "ERROR"], // Add "DEBUG" for even more logging
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
			module: "alert",
		},
		{
			module: "MMM-Remote-Control",         
            config: {
                showModuleApiMenu: true,
                secureEndpoints: false,
                customCommand: {
                monitorOnCommand: 'WAYLAND_DISPLAY=wayland-1 wlr-randr --output HDMI-A-1 --on --transform 270',
                monitorOffCommand: 'WAYLAND_DISPLAY=wayland-1 wlr-randr --output HDMI-A-1 --off',
                monitorStatusCommand: '/home/steve/MagicMirror/monitorstatus.sh'
                }
            }
		},

Additional info

No response

[khassel]

This module needs changes to work with new MagicMirror² version v2.29.0. A PR is on the way but I don't know who is maintaining this project at the moment ...

[Schnabulation]

Interesting, thank you for reply.

Regarding the aforementioned PR: the module works perfectly fine on my setup - only the API does not work. Stock install of the module btw.

[khassel]

the api works with the PR, tested this ...

[khassel]

the module works perfectly fine on my setup

not on my side, e.g. http://localhost:8080/remote.html#update-menu is always empty and http://localhost:8080/remote.html#module-control-menu is missing ...

[Jopyth]

@ezeholz has done most of the maintenance for a long time. But if they are not available I can merge the PRs needed as well.

So #307 should fix the module and the API? Because I just saw #292 has also been open for a very long time, and am not sure if that would still be needed as well.

[khassel]

So https://github.com/Jopyth/MMM-Remote-Control/pull/307 should fix the module and the API?

I did some cleanup/changes in the core mm for v2.29.0 which breaks this module at some points, https://github.com/Jopyth/MMM-Remote-Control/pull/307 is the fix for this.

With this fix the /api/docs shows the swagger site (whithout the fix you get the error described above), but I cannot say if the other PR is still needed.

[ambarusa]

Having the same issue. @khassel's update is working well in my setup

[martbrad11]

I've just installed MM on PC running Linux Mint (Ubuntu version) and have the same problem. I've tried to update MMM_Remote-Control but it tells me I'm up to date. I can see the remote web page but API does not connect. Is there a way I can fix this?

[ambarusa]

Clone this repo and branch temporarily:

https://github.com/khassel/MMM-Remote-Control/tree/mm_fixes

[ezeholz]

So it's safe to merge? I cannot test it anymore, as I don't own a MM instalation anymore.

Sorry for the absence, a lot happened on my side.

[Snille]

I can also confirm that @khassel:s PR works.

[ezeholz]

Please confirm that it's actually working, khassel PR merged

[Snille]

I can confirm, it works now. Thank you.

[github-actions[bot]]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.