JojoS

I ran into the same problem. I have a project root and some subdirs with own .git. These are shown properly when VSCode starts in the project root. I run...

now I have compiled the sources and found when I omit https://github.com/ESPresense/ESPresense/blob/4e0a39d77cf76595555fcb249987b20c5b4dab08/lib/BleFingerprint/BleFingerprint.cpp#L291 then the iBeacon is added to the list. The beacon advertises a power value of 32 (result of...

Thanks, yes, I have an app to change some beacon values. But the sent RSSI is depending on the battery level as I understand from the documentation. I have added...

Yes, exactly

there is an api/web function for the tunersignal: /api/tunersignal. But this works only on the active channel in the box and has no values when the box is in standby,...

I ran into the same trouble, maybe I did not delete the preset 'Your_Network' not correctly and had a trailing space, which is not visible in the WebGUI. Otherwise, I...

@maave0 with your setting I can use the BMP also for debugging. Only thing I could not manage: after connecting to the target, it is only halted and stops anywhere....

thanks. Finally, its working well now. After attaching, the target is not reset and this is intended behaviour. In the 'Run Commands' listbox I added a 'run' or 'start' (for...

that will be no problem. I don’t have the original hardware, but a modified STLink clone with the BMP firmware. As this is a open project on github it is...

sorry, got it by mail and thought its not in the thread. So, for a hardware request just send me a mail.