Device Request - Blinds/Curtains Module - _TZE200_f91miyhj / TS0601

[limkopi78]

Prerequisites:

• Before requesting a device addition, please ensure there is not already a request for the device among the open issues.
• Make sure your Homey is upgraded to firmware v5 or higher.
• You need a physical example of the device

Device Name: Blinds/Curtains Module Device Model: _TZE200_f91miyhj / TS0601 Device Description: Tuya Zigbee Blinds/Curtains Module Link to device image: [Provide the URL to an image/photo of the device]

Device Interview:

"ids": { "modelId": "TS0601", "manufacturerName": "_TZE200_f91miyhj" }, "endpoints": { "ieeeAddress": "a4:6d:d4:ff:fe:78:c9:9e", "networkAddress": 96, "modelId": "TS0601", "manufacturerName": "_TZE200_f91miyhj", "endpointDescriptors": [ { "status": "SUCCESS", "nwkAddrOfInterest": 96, "_reserved": 20, "endpointId": 1, "applicationProfileId": 260, "applicationDeviceId": 81, "applicationDeviceVersion": 0, "_reserved1": 1, "inputClusters": [ 0, 4, 5, 61184 ], "outputClusters": [ 25, 10 ] } ], "deviceType": "router", "receiveWhenIdle": true, "capabilities": { "alternatePANCoordinator": false, "deviceType": true, "powerSourceMains": true, "receiveWhenIdle": true, "security": false, "allocateAddress": true }, "extendedEndpointDescriptors": { "1": { "clusters": { "basic": { "attributes": [ { "acl": [ "readable", "reportable" ], "id": 0, "name": "zclVersion", "value": 3 }, { "acl": [ "readable", "reportable" ], "id": 1, "name": "appVersion", "value": 83 }, { "acl": [ "readable", "reportable" ], "id": 2, "name": "stackVersion", "value": 0 }, { "acl": [ "readable", "reportable" ], "id": 3, "name": "hwVersion", "value": 1 }, { "acl": [ "readable", "reportable" ], "id": 4, "name": "manufacturerName", "value": "_TZE200_f91miyhj" }, { "acl": [ "readable", "reportable" ], "id": 5, "name": "modelId", "value": "TS0601" }, { "acl": [ "readable", "reportable" ], "id": 6, "name": "dateCode", "value": "" }, { "acl": [ "readable", "reportable" ], "id": 7, "name": "powerSource", "value": "mains" }, { "acl": [ "readable", "writable", "reportable" ], "id": 65502 }, { "acl": [ "readable", "reportable" ], "id": 65533, "name": "clusterRevision", "value": 2 }, { "acl": [ "readable", "reportable" ], "id": 65534, "name": "attributeReportingStatus", "value": "PENDING" }, { "acl": [ "readable", "reportable" ], "id": 65504 }, { "acl": [ "readable", "reportable" ], "id": 65505 }, { "acl": [ "readable", "reportable" ], "id": 65506 }, { "acl": [ "readable", "reportable" ], "id": 65507 } ], "commandsGenerated": "UNSUP_GENERAL_COMMAND", "commandsReceived": "UNSUP_GENERAL_COMMAND" }, "groups": { "attributes": [ { "acl": [ "readable", "reportable" ], "id": 0, "name": "nameSupport", "value": { "type": "Buffer", "data": [ 0 ] } }, { "acl": [ "readable", "reportable" ], "id": 65533, "name": "clusterRevision", "value": 2 } ], "commandsGenerated": "UNSUP_GENERAL_COMMAND", "commandsReceived": "UNSUP_GENERAL_COMMAND" }, "scenes": { "attributes": [ { "acl": [ "readable", "reportable" ], "id": 0 }, { "acl": [ "readable", "reportable" ], "id": 1 }, { "acl": [ "readable", "reportable" ], "id": 2 }, { "acl": [ "readable", "reportable" ], "id": 3 }, { "acl": [ "readable", "reportable" ], "id": 4 }, { "acl": [ "readable", "reportable" ], "id": 65533, "name": "clusterRevision", "value": 2 } ], "commandsGenerated": "UNSUP_GENERAL_COMMAND", "commandsReceived": "UNSUP_GENERAL_COMMAND" } }, "bindings": { "ota": {}, "time": { "attributes": [], "commandsGenerated": "UNSUP_GENERAL_COMMAND", "commandsReceived": "UNSUP_GENERAL_COMMAND" } } } } }

Additional Comments: It is a Dooya Zigbee module that work on Tuya Zigbee. It is connected to the blinds via RJ11 cables from Dooya motor. I've tried the adding the new device by simply clone your github and adding the manufacturer ID and model ID to the device json file. I'm able to add from homey app after that. From homey app run console I can see the status updates and commands to the module showing no error. However, controlling from the homey app doesn't yield a physical response from the motor (I do see the logs sending the commands successfully. When I use the motor remote to control, I can see zigbee status updates processed by the app but no updates on UI.

How to interview a device:

• Add the device as a generic Zigbee device in Homey
• Navigate to https://developer.athom.com/tools/zigbee.
• Interview the device, the button for this is to the right of the device in the list of Zigbee units.
• Click the copy button/icon to capture the device information.
• Paste the copied information above.

Note: To be able to add more devices to the Tuya Zigbee app, we rely on community members like you to provide interviews of the devices you want added. Thank you for your contribution!

[limkopi78]

Bumping this up if possible.

[limkopi78]

Bumping again.