JohanBendz
Wall Dimmer _TZE200_3p5ydos3 / TS0601 - Could not get device by id
Describe the bug After pairing / installation (succesfull), i'm trying to switch the light on/off. This will not succeed as i get 'Could not get device by ID'.
To Reproduce Install wall dimmer via Tuya Zigbee (or as generic device), try to switch on/off the light and this will not work. You recently added this device so it is in test-phase. I did not work before.
Expected behavior Light can be turned on/off, and the light is dimmable
App and Homey version What Homey version are you running? 10.0.1 What version of Homey firmware do you use? 7.4.0.1310 What version of the Tuya Zigbee App are you using? test version 0.2.17
Screenshots
Additional context Wall Dimmer _TZE200_3p5ydos3 / TS0601
Hope that above info is sufficient.
@JohanBendz Same issue here (https://github.com/JohanBendz/com.tuya.zigbee/issues/354). Tested this again in 0.2.17 and same result: Could not get device by ID. I have created a bug for this here: https://github.com/JohanBendz/com.tuya.zigbee/issues/448
So there are some duplicates (sorry, second time here). I will try to close the others.
Hi @JohanBendz
Tested in v0.2.18
- Able to add device to Homey
- Able to switch lights on/off
- Able to dimm
However they seemed to work correct, later in the evening when i tried to switch the light i got an error message saying: 'Apparaat is niet te bereiken'.
Quite strange as i was able to switch on/off and dimm. Anything i can do from this point on to provide you more info?
Hi @JohanBendz same issue here Johan it's still not working only occasionally. Best regards Peter.
@Peter-Celica @TheElephant1979 A new driver (no need to re-pair) is on it's way to the test version. Hope this will fix things.
Awesome! One addition; when switching the device physically the state isn't syncronized to Homey at the moment. Possible to provide a fix for that also?
Lot of updates lately 💪👍🏻
Hi Johan good morning 🌞, Thanks for your effort and hopefully I will receive my new Homey today, if the packet service is on time and I'll let you know if everything is working well now.
Have a nice day and best regards, Peter.
Verzonden van mijn Xiaomi MI10 Lite 5G
Op zo 22 sep. 2024 22:01 schreef Johan Bendz @.***>:
@Peter-Celica https://github.com/Peter-Celica @TheElephant1979 https://github.com/TheElephant1979 A new driver (no need to re-pair) is on it's way to the test version. Hope this will fix things.
— Reply to this email directly, view it on GitHub https://github.com/JohanBendz/com.tuya.zigbee/issues/448#issuecomment-2366940309, or unsubscribe https://github.com/notifications/unsubscribe-auth/ANNSGU4VXNMVYZW2NOOGP2DZX4OYVAVCNFSM6AAAAAA5MGUBWGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNRWHE2DAMZQHE . You are receiving this because you were mentioned.Message ID: @.***>
Thanks for the update @TheElephant1979 Good to hear everything works now 😀
Thanks for the update @TheElephant1979 Good to hear everything works now 😀
You can buy an extra beer next weekend. Enjoy it. MadeADonation @JohanBendz