Restoring fan speed and swing mode after power-cycle fails

[florianbrede-ayet]

I noticed that restoring the previous fan state and swing mode fails after a power-cycle of the heatpumpt (and thus the ESP32).

This is the log for reference (original swing mode was OFF and fan mode was LOW), I can take a look as soon as I have time:

[03:13:13][D][lg-controller:934]: update
[03:13:17][D][lg-controller:934]: update
[03:13:23][D][lg-controller:934]: update
[03:13:29][D][lg-controller:934]: update
[03:13:29][E][lg-controller:975]: discarding incomplete data 00
[03:13:35][D][lg-controller:934]: update
[03:13:35][E][lg-controller:521]: unknown fan mode, using Medium
[03:13:35][E][lg-controller:545]: unknown swing mode
[03:13:35][D][lg-controller:600]: sending A8.29.00.00.00.01.13.11.40.00.00.00.63 (13)
[03:13:35][D][climate:380]: 'LG Bild Wohnzimmer' - Sending state:
[03:13:35][D][climate:383]:   Mode: OFF
[03:13:35][D][climate:400]:   Swing Mode: UNKNOWN
[03:13:35][D][climate:403]:   Current Temperature: 18.50°C
[03:13:35][D][climate:409]:   Target Temperature: 18.50°C
[03:13:35][W][component:214]: Component <unknown> took a long time for an operation (0.55 s).
[03:13:35][W][component:215]: Components should block for at most 20-30ms.
[03:13:41][D][lg-controller:934]: update
[03:13:41][D][lg-controller:671]: received A8.29.00.00.00.01.13.11.40.00.00.00.63 (13)
[03:13:41][D][lg-controller:687]: verified send
[03:13:41][D][sensor:094]: 'Uptime': Sending state 37.53000 s with 0 decimals of accuracy
[03:13:47][D][lg-controller:934]: update
[03:13:53][D][lg-controller:934]: update
[03:13:56][D][esp32.preferences:114]: Saving 1 preferences to flash...
[03:13:56][D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed
[03:13:59][D][lg-controller:934]: update
[03:13:59][E][lg-controller:521]: unknown fan mode, using Medium
[03:13:59][E][lg-controller:545]: unknown swing mode
[03:13:59][D][lg-controller:600]: sending A8.28.00.00.00.01.13.11.40.00.00.00.60 (13)
[03:13:59][W][component:214]: Component <unknown> took a long time for an operation (0.52 s).
[03:13:59][W][component:215]: Components should block for at most 20-30ms.
[03:14:04][D][climate:011]: 'LG Bild Wohnzimmer' - Setting
[03:14:04][D][climate:015]:   Mode: HEAT
[03:14:04][D][climate:380]: 'LG Bild Wohnzimmer' - Sending state:
[03:14:04][D][climate:383]:   Mode: HEAT
[03:14:04][D][climate:400]:   Swing Mode: UNKNOWN
[03:14:04][D][climate:403]:   Current Temperature: 18.50°C
[03:14:04][D][climate:409]:   Target Temperature: 18.50°C
[03:14:05][D][lg-controller:934]: update
[03:14:05][D][lg-controller:671]: received A8.28.00.00.00.01.13.11.40.00.00.00.60 (13)
[03:14:05][D][lg-controller:687]: verified send
[03:14:05][D][lg-controller:671]: received C8.10.00.00.00.01.13.00.00.00.40.00.79 (13)