James

Try adding `'-DLOG_LEVEL=LOG_LEVEL_TRACE'` to your Build Arguments. It'll dump a lot more info out to the console which might help narrow down the issue.

Fixed the Type-O's. I wasn't actually able to find any definitive documentation from Home Assistant on how this works, Instead i looked at the MQTT messages coming from Zigbee2MQTT and...

Hi @Odyno, I'll do my best to answer your questions and explain my reasoning: >In the case of the discovery message (from A1 to B1) for the MQTT Device trigger...

@Odyno I have rolled back the addition of "action" object in MQTT Payload in this PR. Would you mind taking another look and let me know your thoughts?

@1technophile This has now been done. I tried to give a general explantion of how to migrate to the proposed API and given specific examples for Home Assistant as that's...

You'll need to provide more information like the board and receiver you're using, which configuration (environement, i.e. esp32dev-rf, etc) you're trying to flash and how you're trying to flash it...

First and easiest suggestion, double check your wiring. Failing that, try using an ESP32 and a cheap 433Mhz Receiver board like [These](https://www.amazon.com/QCCAN-Wireless-Transmitter-Receiver-Antenna/dp/B0BLTSSMXH/), connect it up using some Dupont Jumper wires...

I have tested this and reverse proxy through NPM appears to work as expected with a "normal" config. (where the RTMP container is set as the proxy host) in this...

Your video source should be relative to the web page if served by the same proxy ``