WsprryPi transmit signal quits long before two mins

[stiteshl]

I am trying to transmit on 20M and running a Pi-3-B+, but this problem also happens on a 3-B or a Zero-W. The program never crashes, but the PTT or transmit signal coming from the Pi stops somewhere between approx. 1-8 secs. The signal never hangs in there for anywhere near 2 mins. With the top-hat removed the software does the same on all three Pi's. This happens whether I am running the code as self-calibration or free-running. James, is your source code looking for timing from outside the code other than NTP? What do you think the problem is? Thank you, Herbert, WA0TEY

[gluck35533]

Hello Herbert!

I had the same problem until I disabled 1-wire interface in the rasbbery PI configuration menu.

My wspr beacon is now powered by WsprryPi software and Raspbian Jessie release 2017-07-05. That being said, I had no problems installing and compiling WsprryPi.

Try to follow my advice and disable 1-wire interface in the Rasbbery PI configuration menu.

Best wishes Dmitry, R2DTJ!

[stiteshl]

Thank you so much Dmitry, your fix has fixed my problem! Are you also into packet radio through the ISS digi-peter? my direct e-mail is: [email protected]

---

From: gluck35533 [email protected] Sent: Thursday, August 13, 2020 1:11 PM To: JamesP6000/WsprryPi [email protected] Cc: stiteshl [email protected]; Author [email protected] Subject: Re: [JamesP6000/WsprryPi] WsprryPi transmit signal quits long before two mins (#34)

Hello Herbert!

I had the same problem until I disabled 1-wire interface in the rasbbery PI configuration menu.

My wspr beacon is now powered by WsprryPi software and Raspbian Jessie release 2017-07-05. That being said, I had no problems installing and compiling WsprryPi.

Try to follow my advice and disable 1-wire interface in the Rasbbery PI configuration menu.

Best wishes Dmitry, R2DTJ!

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://eur06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FJamesP6000%2FWsprryPi%2Fissues%2F34%23issuecomment-673469248&data=02%7C01%7C%7C15337cdf73fc48a62b5508d83f8a60e2%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637329210842204483&sdata=%2BsdZT75HUG%2FekPkwWm5OBCEkARxGLW061DjSwz9nI3s%3D&reserved=0, or unsubscribehttps://eur06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAIKII4FVCB3QJILDAFSKAW3SAPQ7LANCNFSM4LLK6D2Q&data=02%7C01%7C%7C15337cdf73fc48a62b5508d83f8a60e2%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637329210842204483&sdata=cYv0afY4Ph%2FF2WUZJq7AHHyiRu%2F8pjOt9BaIwEmjdnc%3D&reserved=0.