James-F2

One last thing for people who are using DisplayCAL and a calibration device. If you are using DisplayCAL to create an ICC make sure you select "XYZ LUT+Matrix" in the...

Yeah, amazing that this level of accuracy can be applied natively at the GPU level (including advanced dithering), without the need of external hardware, expensive grading monitors, or specialized software....

Not at all. It's nothing special. 256 neutral patches, and 7 for Single and Multidimensional color patches. I think 7 is way to much, 5 is more than enough, but...

> since novideo_srgb samples the **extreme points and the grayscale axis only** Ah, thank you, that clarified a lot. So there is no need for color patches at all, only...

I skip calibration and Profile only, it provides enough data and is much faster since there is no iterative calibration to minimize dE during measurement. I just did a Curves+Matrix...

I have to say that the ease of jumping between calibrated and accurate gamma curves without creating several different 3D LUTs for MadVR is absolutely delightful. I use sRGB, BT.1886...

Here's a summary; Skip calibration by setting everything to 'as measured' only do 'interactive display adjustment' for 6500K white point. Profile Curves+Matrix (black point compensation disabled) with 256 neutral patches...

I am not sure how novideo_srgb is using color patches from the Matrix profile though, and whether there is a benefit of using more than just three 100% primary RGB...

I Profiled a new ICC with 256 neutral and 3x25 color patches. Leaving the i1 Display Pro on screen after profiling, I see no difference in verification between release and...

I see an improvement in the smoothness of the greyscale with v2.7. There was a small 'kink' in the "16Bit Gradient.png" test pattern (I shared it above) with 2.6 and...