LoRaWanGateway

LoRaWanGateway copied to clipboard

why the percent of receive success is low when set the GW_SF to ALL

11

Hi JaapBraam，I am coming again When I set parameter GW_SF to a specific value(like SF10), the gateway can receive 100% ok， But when I set the parameter GW_SF to ALL,...

Kingwulin

Hi JaapBraam, First of all, very nice work! It's not an issue but a question. Can I change the wifi configuration without using a serial connection ? This will be...

robervaltaylor

Why won't support for multiple channels work?

6

You write in your goals "Add support for more than one channel (won't work :-( )". I'm curious as to why not and what your intended approach was.

Eric24

Incorrect transmit frequency

9

Gateway receives uplink ok at 865062500 but then transmits an ack at 865620000 when it should be the same as the Uplink frequency. Could be misinterpreting the ack request from...

Suretronic

Add status messages

2

Some 'cosmetic' changes: Maybe in a next version you can add a few extra status messages. When I first started the gateway, it seemed it wasn't responding, but then I...

BoelD

add localization to the time stamps

3

By adding CONFIG["GW_TZOFFSET"] = "-8" for PST and crate a localtime function instead of gmtime using this offset times the 3600(num sec in 1 hour). Currently get error though. local...

dlarue