JNP

Have you also looked at the STM32G0B1 series? The STM32G0B1CBT3 goes up to 125°C and is supported by katapult.

Is this about a specific use case?

424J/2HP from ebmpast are 24V 1U server fans. https://www.ebmpapst.com/de/en/products/axial-fans/p/424JH.html

May I ask what you want to do with a high flow fan on a printer?

Noctua now also has 24V. Another option would be to use a 24V fan and throttle it via PWM.

The decision did not come from me.

If someone short-circuits these 12V because a fan is defective, the TMC5160 would also be destroyed during operation. This is the reason why these 12V are not available for other...

I will take it into account in the next version.

> are there any other users of this board on here, i have put bootloader and firmware on but cant connect to any external can modules. is there a original...

Perhaps the LED strip is too long. In my printer, I have a total of 36 LEDs (2x18) on the port. Was the V2.4 an LDO kit?