JCalvi

I suspect @MarcoViti is willing to try builds to narrow it down, he mentioned he just did not have access to old nightlies to do so. If not I can...

This would be great. In the interim would it be possible to make the potentiometer have hot keys for values so we can simulate the same thing? At the moment...

The custom chip works well BTW. Thanks for the suggestion.

Refer: https://github.com/niceboygithub/AqaraGateway/issues/301#issuecomment-2387456090

I have the exact same issue as the OP. In my case all Shelly’s and home assistant are in the same subnet. It is always 1 or 2 of the...

Definitely all set to unicast. `"device_info": { "name": "Home Theatre Light", "model": "SHSW-1", "sw_version": "20230913-112003/v1.14.0-gcb84623" }, "device_settings": { "coiot": { "enabled": true, "update_period": 15, "peer": "192.168.1.2:5683" }, `

All my devices are on the same subnet as well, no internal firewalls, subnets or vlans so as simple as can be. The most “complex part of my network” is...

I since see that this is a repeat of: https://github.com/niceboygithub/AqaraGateway/issues/281#issue-2417632823 So I can set the value in configuration.yaml which is good, but still would be better if Aqaragateway could query...

I would say an even higher limit would be fine myself. With 4096mb and -T4 set manually there were no issues running imager. I had before posting tried the VM...

Just tested dev branch with 8192mb on VirtualBox. Got 3 threads utilised, no swap file and plenty of memory left. I can easily up the VM to more ram but...