How to connect via FTP on tne Virtual Machine to transfert my data

[JBerthelier]

Several people ask for that:

Here is my tuto

1)Firsly check your Network Configuration in VirtualBox for the PiRATE-VM

Select Global Settings from the File menu --> Select the Network item in the list -In "attached to" check that the "Bridged Network" is selected -Go in "advanced" (blue arrow) -Check that for the Promiscuous mode "Allow All" -Cable connected: check

2) Start your PiRATE-VM

2.a-just in case restart the proftdp:

open a konsol and run: sudo /etc/init.d/proftpd reload sudo /etc/init.d/proftpd restart

( the admin pasword is jeremy07 )

2.b-Obtain your IP adress open a konsol and run the ifconfig command (https://www.computerhope.com/unix/uifconfi.htm)

Example:

eth0 Link encap:Ethernet HWaddr 09:00:12:90:e3:e5 inet addr:192.168.1.29 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe70:e3f5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:54071 errors:1 dropped:0 overruns:0 frame:0 TX packets:48515 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:22009423 (20.9 MiB) TX bytes:25690847 (24.5 MiB)

this will show you the "inet addr:" which is your ip adress

Then go back to your physical machine

3) Open Filezilla and connect you to the PiRATE-VM

Host: your IP adress login: jeremy password: jeremy07 Port: 21

I just re-checked this method and it works for me,

Best!

Jeremy

[pwkooij]

Not sure why, but I am getting a connection time out warning in FileZilla