J-Dunn
J-Dunn
I have just installed Arduino-Makefile from github zip and made a Makefile for grbl-sketch.ino , which is provided as the sketch to build GRBL. It mostly seems to work but...
### Version Other ### Hardware / Firmware GRBL 0.9 ### What happened The entire download facility on JFrog is out . I get a badly formatted page with several panels...
**Describe the bug** ugs platform fails to start. Gets stuck on splash screen **To reproduce** Steps to reproduce the behavior: 1. get current 2.0.7 with java download and unpack tar.gz...
Too much output when getting error from GRBL vesion 0.xx Clutters screen and hard to read. To save space in memory, GRBL 1.1 and newer only provides an error code,...
UGS platform disabling command input during machine activity. If I send a command, eg, g0X200 , the command input area become inactive and greyed out until the machine becomes at...
The visualiser in ugsplatform is an improvement on the old UGS one. That's great. However, only being able to turn it in about two axes is limiting. The mouse x...
Entering ? command to GRBL just gets OK response, not expected output. That suggests it is stripping out this char and just sending an empty line. (Something it actually fails...
``` grblHAL has moved to a [new home](https://github.com/grblHAL), this repository is no longer maintained and will be archived in a few days. Do not open any new issues here. When...
Hopefully at some stage aligning two parts can be automated: select two gears ( or rack+gear ) ; click on an icon and they snap into mesh with each other....
https://forum.freecadweb.org/viewtopic.php?p=332551#p332551 It would be helpful in aligning gears if the reference circle was visible as a circle ( in a lighter line colour than the gear ) and a similar...