Browser-Phone
Browser-Phone copied to clipboard
Voicemail: Icon and Notify not Display
Hello:
I have Asterisk 18.11.2 and not working: Icon Voicemail and Notify not Display.
Anything idea?
Regards.
If the system has been sent a message-summery report, like this
NOTIFY sip:[email protected]:55874;transport=WS SIP/2.0
Via: SIP/2.0/WS 172.31.25.159:8080;rport;branch=z9hG4bKPjb7879062-418b-407c-96c5-1a1eeca3410c;alias
From: <sip:[email protected]>;tag=a297d6ff-7677-4f61-921b-7964ca60bb33
To: "Conrad De Wet" <sip:[email protected]>;tag=1318mk42ft
Contact: <sip:172.31.25.159:8080;transport=ws>
Call-ID: s4di2vaoq0bi20t167mj
CSeq: 18889 NOTIFY
Event: message-summary
Subscription-State: active;expires=299
Allow-Events: message-summary, presence, dialog, refer
Max-Forwards: 70
User-Agent: Innovate Asterisk
Content-Type: application/simple-message-summary
Content-Length: 49
Messages-Waiting: yes
Voice-Message: 1/1 (0/0)
Then in the Browser Console log. You should get:
Messages Waiting!
Voicemail: 1 1 0 0
At this point the notification appears.
If you are not getting the SIP message summery report, you need to check that first.
Any documentation available on configuring voicemail?
just make sure you have created a voicemail entry, and point to it in the endpoint
mailboxes=100@default
Normally I add this to the aor section tho. https://wiki.asterisk.org/wiki/display/AST/Asterisk+18+Configuration_res_pjsip
I'm getting voicemail notification. How to read this message? Does it show only the number of voice messages?
The tooltip shows lang.voicemessages.
Make sure you update the style sheets.
The tooltip shows lang.voicemessages.
I'll update that.
Hello:
Sorry for the delay in writing... I was able to solve the voicemail problem.
My experience is the following:
I have a IP Phone Grandstream GXP2170 and the voicemail configuration must be included in type=endpoint. And Web Phone the voicemail configuration must be included in type=aor.
Thank you all for your support.
Regards.
Pls share the contents in /etc/asterisk/voicemail.conf.
In which document to mention the type?
I have also written an update to allow to out-of-dialog message-summary messages. This way you don't need to actually SUBSCRIBE to the voice messages (with AOR), Asterisk will just push down a message to the endpoint if message-summery state changes.
No need to subscribe (out-of-dialog)
type=endpoint
mailboxes=100@default
With subscribe
type=aor
mailboxes=100@default