Ierlandfan

ppsFactoryTool.txt works indeed. It opens port 8090. Sifting through the extracted firmware I saw in /etc/init.d/S90app: ``` hostname Meari mkdir -p /opt/pps MTDNUM=`cat /proc/cmdline | sed 's/.*ppsAppParts=\([0-9]\).*/\1/'` \# debug\ MTDNUM=2...

ppsFactoryTool worked: http://192.168.1.66:8090/proc/cmdline: > console=/dev/null LX_MEM=0x3fe0000 mma_heap=mma_heap_name0,miu=0,sz=0x1d00000 pcbversion=B3S_S1_V10 sensor=gc2063mipi Since I have access to the files using the dump I can look through all the files if there's a need...

I want to give back tot the community as always and I love the challenge. So if we can root this one and find more info for 5.0.5 or 5.0.6...

Can you elaborate on the command a little more just to make sure I replaced the right data. mkfs.cramfs -b 4096 -e 1 -N little -n ppsapp mycramfs-root/ my.cramfs //...

Now I see, it's not 1 command. It's three! Now it makes sense! And succes!!!! I flashed the modified binary and 1. it still works. 2. It works better :-)...

I installed ssh as a workaround.. the device is not stable when started with the ppsapp on the card and using output.log, I have ssh ssh myselfedfinedname@ip /bin/sh) working (for...

Another thing is my tuya config reads 110 instead of 1...looking into that as well.. it was 0 so I guess it adds a 1 in front of the 0...

bootcmd=sf probe 0; sf read 0x21000000 0x50000 0x280000; bootm 0x21000000 (as found in U-Boot)

The 0x21000000 adress didn't worked out. I changed the adress manually by invoking fw_setenv from inside custom.sh Just to see if /dev/null/ could be become ttyS0 which worked. For some...

Is this also possible for the 2.9.6 version? I just want the (red/blue) leds to stay off when booted up. That red is on while booting is no big deal.