[Bug] Zimablade does not start up with PCIe

[strouja]

Describe the bug

when I attached the PCIe storage expansion PCIe to NVMe SSD Adapter 2230/2242/2260/2280 M Key B Key Interface – Zima Store Online (zimaboard.com) The board would boot up. I removed the cmos battery and it would not boot up with the PCIe to NVMe & NGFF SSD Adapter connected with two 4 TB Samsung 990 Pro SSD attached to the SSD adapter

To Reproduce

Steps to reproduce the behavior:

1. Power off Zimablade
2. Attach PCIE adapater with two NVME drives in the PCIe adapter
3. Attach Power to the ZimaBlade
4. The device is now dead and only can be revived by removing PCIe adapater and removing RTC battery, replacing RTC battery and attach power, then Zimablade will boot up

Expected behavior

A clear and concise description of what you expected to happen.

Screenshots

If applicable, add screenshots to help explain your problem.

Desktop (please complete the following information):

 - OS: Debian 12 & 11
 - CasaOS 0.4.9 and earlier

System Time

Run timedatectl and share the output

(timedatectl output here)

Logs

Run following command to collect corresponding logs:

sudo journalctl -xef -u casaos-gateway
sudo journalctl -xef -u casaos-user-service
sudo journalctl -xef -u casaos-local-storage
sudo journalctl -xef -u casaos-app-management
sudo journalctl -xef -u casaos.service

Additional context

Add any other context about the problem here.

If you are a Zimaboard user, make it explicit with when you got your Zimaboard.