Progress on ISS Mimic High Fidelity Overhaul of CAD Models

[ISS-Mimic]

This issue will document our status on completing the upgrade of the ISS model to the High Fidelity version extracted from the Blender model in #125

Anyone feel free to contribute, the work is very tedious. Involves extracting the raw components from the blender model and creating geometry based on those features. The blender model elements are not very good for surfacing directly, so we usually create the models from scratch and just base them on the dimensions of the blender model.

@streadgold is handling the truss and pallets and @Digisembler is working on the US Lab at the moment

Model	Extracted from Blender	In-Work (name)	Completed
PMA1	✔	✔ @streadgold	✔
PMA2 / PMA3	✔	✔ @Digisembler	✔
PMA2/3 + IDA2/3	✔	✔ @streadgold	✔
Columbus	✔	✔ @streadgold	✔
Node 2	✔	✔ @streadgold	✔
JEM	✔	✔ @streadgold	✔
JLP	✔	✔ @streadgold	✔
JEM EF	✔	✔ @streadgold	✔
US Lab	✔	✔ @Digisembler	✔
Node 1	✔	✔ @streadgold	✔
US Airlock	✔	✔ @Digisembler	✔
Node 3	✔	✔ @streadgold	✔
Cupola	✔	✔ @streadgold	✔
NRAL	✔	✔ @streadgold	✔
PMM	✔	✔ @streadgold	✔
BEAM	✔	✔ @streadgold	✔
FGB	✔	✔ @streadgold	✔ could be better
MLM	✔	✔ @streadgold	✔ slightly different than FGB
RS Node	✔	✔ @streadgold	✔ could be better
SM	✔	✔ @streadgold	❌
MRM1	✔ link	➖	❌
MRM2	✔ link	➖ @ayasname	❌
Z1	✔	✔ @streadgold	✔
S0	✔	✔ @streadgold + @Digisembler	❌
S1 = P1?	✔	✔ @streadgold	❌
S3 (not the same as P3)	✔	✔ @streadgold	❌
P3	✔	✔ @streadgold	❌
S4 = P4	✔	✔ @streadgold	✔
S5 = P5	✔	✔ @streadgold	✔
S6 (not the same as P6)	✔	✔ @streadgold	✔
P6	✔	✔ @streadgold	✔
ESP1	✔	➖	❌
ESP2	✔	➖	❌
ESP3	✔	➖	❌
ELC1	✔link	✔ @ayasname	✔
ELC2	✔link	✔ @ayasname	✔
ELC3	✔link	✔ @ayasname	✔
ELC4	✔link	✔ @ayasname	✔
AMS	✔link	➖	❌
MT/MBS	✔	✔	✔ thanks to CSA
SSRMS	✔	✔	✔thanks to CSA
SPDM	✔	✔	✔thanks to CSA
Soyuz	✔	✔ @streadgold	✔ thanks to CSA
Progress	✔	✔ @streadgold	✔ modified from CSA soyuz
Cygnus	✔	✔ @streadgold	✔ thanks to astro_sam - thingiverse
HTV	✔	✔ @streadgold	✔ thanks to CSA
Dragon	✔	✔ @streadgold	✔ thanks to nick gust - grabcad
Starliner	✔	✔@Digisembler	✔thanks to astro_sam - thingiverse
Dream Chaser + Shooting Star	✔	✔@streadgold	✔ thanks to Matthew Weippert - grabcad
Solar Arrays	✔	✔ @streadgold	✔
PV Radiators	✔	✔ @streadgold	✔
HRS Radiators	✔	✔ @streadgold	✔
CMG	➖	➖	❌
NTA	➖	➖	❌
ATA	➖	➖	❌
PM	➖	➖	❌
PFCS	✔	✔ @streadgold	✔
BCDU	➖	➖	❌
MBSU	➖	➖	❌
Battery	➖	➖	❌
MDM	➖	➖	❌
DCSU	➖	➖	❌
PCU	✔	✔ @streadgold	✔
SGANT	➖	➖	❌
PR/Yaw Joint	➖	➖	❌
FHRC	➖	➖	❌
UTA	➖	➖	❌
SASA	✔	➖	❌
WETA	✔	➖	❌
UHF Antenna	➖	➖	❌
CTC	➖	➖	❌
Stowed HRS	➖	➖	❌
Stowed PVR	✔	✔ @streadgold	✔

Symbols | ❌ | ➖ | ✔

[ISS-Mimic]

completed JEM EF

[ISS-Mimic]

JEM, JLP, Columbus, and PMM are done (ish).

Just making printable versions for now - so they are one piece prints (not designing for internal electronics at the moment)

[ISS-Mimic]

Node 2 is done! ish. And therefore Node 3 is done ish as well

[ISS-Mimic]

PMAs + IDAS done, PMA1 done, Node 1 done, Nanoracks Airlock Done, BEAM done

[ISS-Mimic]

USOS is almost completely done now - just a few tweaks needed