Keil编译环境下使用定时器1作为串口波特率发生器报错

[perseverance51]

在uart1_timer1_tx.c文件中原外部变量引入：

extern __CODE uint16_t ticks_ms; extern __CODE uint8_t ticks_us, clkdiv;

需要如下修改： ` #if defined (SDCC) || defined (__SDCC) extern __CODE uint16_t ticks_ms; extern __CODE uint8_t ticks_us; //clkdiv (include fw_reg_stc8h.h) #elif defined CX51 extern uint16_t code ticks_ms; extern uint8_t code ticks_us; #endif

……

UART1_TxHex(CLKDIV);//改成大写

在fw_sys.c文件中调整如下： #if defined (SDCC) || defined (__SDCC) __CODE uint16_t ticks_ms = (__CONF_FOSC / ((__CONF_CLKDIV == 0)? 1 : __CONF_CLKDIV) / __CLK_REF); __CODE uint8_t ticks_us = (__CONF_FOSC / ((__CONF_CLKDIV == 0)? 1 : __CONF_CLKDIV) / __CLK_REF / 1000); #elif defined CX51 uint16_t code ticks_ms = (__CONF_FOSC / ((__CONF_CLKDIV == 0)? 1 : __CONF_CLKDIV) / __CLK_REF); uint8_t code ticks_us = (__CONF_FOSC / ((__CONF_CLKDIV == 0)? 1 : __CONF_CLKDIV) / __CLK_REF / 1000); #endif `

[IOsetting]

Thank you for the report. The code should work as __CODE macro will be translated to code in __CX51__, which is defined in fw_reg_base.h

#elif defined __CX51__
...
    #define __CODE  code
    #define __REENTRANT  reentrant

I will test it in Keil C51 later.

[IOsetting]

The commit e2024f59fb70bef0d531be6a2b3c550f6a7a98e8 has fixed this issue.