Sören Beye

Since these sensors are incredibly cheap, what about spraying some conformal coating on the breakout board and see what happens? Maybe that's enough to weatherproof it for a few years

You can (and should) define them in Valetudo and just call them by name

@hannseman you might want to take a look at https://github.com/Hypfer/Cybele It should hopefully probably maybe provide a framework to do so. Utilizing BlueZ via DBUS to completely ditch that broken...

Adding other beacons such as those used for contact tracing might also be an idea. Since those change all the time, the only useful metric would probably be to have...

Please check if this is still an issue with the latest version of Valetudo and a fresh firmware built with the dustbuilder. If so, please open a new ticket

https://github.com/nurikk/zigbee2mqtt-frontend/blob/a2e3dc31110b33aa5fe38e5e8ec7970aabf315bf/src/components/device-image/index.tsx#L19 What's stopping anyone from extending this function (that already exists!) to take an optional configuration parameter into account where you can specify a custom asset host? That can't be...

Take all this with a grain of salt as I'm quite new to this project, but > You need a way to properly configure that There's already a way to...

I did not check the latest beta, however I'm certain that the issue still persists on that version, as https://github.com/home-assistant/frontend/pull/20558 is about the `theme_color` (the accent color) whereas this PR...

Taken from the readme: > The internal Mi Model ID of the supported device is deerma.humidifier.jsq. The Model on the packaging being ZNJSQ01DEM. What is the model ID of your...

You could use screencloud.