Unstable speed between 0.00MB/s and 40-50MB/s microSD

[pitrako]

I get something like 0-8-15-35-40-50MB/s speed after a while in the process of installing on a microSD, at the beginning It starts the installation between 35-40-50MB/s.

[masagrator]

If you have this only in NSZ, then this is normal.

[pitrako]

I tried NSP, It doesn't reach 0.00MB/s now but 8.38MB/s It's the minimum and 41.94MB/s the maximum yet.

[Masamune3210]

NSP files and the like are containers. The NCA files and others have to be moved out of the containers into the correct spot, and registered as installed to the system. Going up and down in speed is normal for the most part, as bigger files will copy faster since it's not switching away to do something else all the time

[Huntereb]

This is just due to how we poll for speeds during installations. We do it less so that we don't have to update the UI as often. The code could probably be made to display the actual speed a little more accurately, though.

[ghost]

What can be more accurate than transferred bytes divided by elapsed time from start?

[johnkelvinliu]

what microsd are you using to get 50MB/s writing speed? Using USB3.0+ cable installation? Laxar PLAY & Sandisk ultra 1TB microSD card can only get max about 33MB/s writing speed (varies) with USB 2.0 cable installation; while it is max about 38MB/s writing speed(varies) with 1G LAN installation.

[HookedBehemoth]

code sucks too much to fix this