SungemSDK issues

树莓派4b用户运行模型文件报错

因为我下你们给的镜像连不上wifi ，所以就用的自己的镜像，配置好opencv 等各种包后。再到github获取了SDK 核心库和Python开发包。install好后在运行情景记录器模型文件时。报错没有queue这个moudle

Error - Cound not open HS device.

更新固件出现这个报错，连接是成功到，lsusb有固件代码，但是更新固件不行。还有就是，运行Hello2018.py报错:Status Error

After a firmware upgrade the integrated camera is no longer working. Please see the screen shot below. The Hello2018.py test still works.

Screen shot below: ![image](https://user-images.githubusercontent.com/50967768/61586892-be3e9e00-ab32-11e9-9059-5b68cf476d53.png)

DavidGrob-MS

feature request: upsampling layer

at what point will upsampling layers be supported (like ResizeNearestNeighbor)? or do you have a workaround to support similar functionality? my use-case is to get yolov3 to run on the...

marco333333

Can SungemSDK accept darknet data ?

1

According to [https://www.dfrobot.com/product-1866.html](https://www.dfrobot.com/product-1866.html), It says that SimemSDK support darknet. But from the document site [https://hornedsungem.github.io/Docs/](https://hornedsungem.github.io/Docs/), I can not find the relative information. So, does SungemSDK accept the trained weight/configuration files...

wureka