Hedda

FYI, HW tip now is to instead use Tube's Zigbee Gateways open-source hardware by @tube0013 (which is tested with ESPHome). It is based on WT32-ETH01 ESP32 board from Wireless-Tag which...

I guess that best would probably be if you could get some informal advice about their API/CLI protocols from s-hadinger as he has experience of both since he implemented ZNP...

CC1352 is more expensive but allow Sub-1 GHz frequencies used by Zigbee Smart Energy (ZSE) profile which isn't part of Zigbee 3.0 https://www.ebyte.com/en/product-view-news.aspx?id=766 https://www.szrfstar.com/product/235-en.html https://www.szrfstar.com/product/188-en.html Zigbee Smart Energy is the...

FYI, thegroove made a simple to use Serial-to-IP bridge appliance firmware for Sonoff Zigbee Bridge running ESPHome firmware: https://github.com/thegroove/esphome-zbbridge oxan and thegroove also look to have made two alternative serial...

FYI, ZB-GW03 eWeLink Ethernet Zigbee Gateway is based on an ESP32 and Silabs EFR32 Zigbee and has been hacked with Tasmota. https://github.com/arendst/Tasmota/discussions/12764 ZB-GW03 has been hacked with Tasmota32 and look...

FYI, there's now a detailed step-by-step instruction about flashing Tasmota on ZB-GW03 eWeLink Ethernet Zigbee Gateway (wired network bridge) for Zigbee2Tasmota (also using with Home Assistant's ZHA): https://thehelpfulidiot.com/a-wired-sonoff-zigbee-alternative Again, basic...

FYI, ESP32 and CC2652P based "Itead SONOFF Zigbee Bridge Pro" (ZBBridge-P, a.k.a. "ZB Bridge-P") is now available for purchase: https://itead.cc/product/sonoff-zigbee-bridge-pro/ FCC leak from earlier in January this year showed inside...

Any news on support for Sonoff iFan03 by ITeam in ESPurna? https://www.itead.cc/sonoff-ifan03-wifi-ceiling-fan-light-controller.html It is supported in Tasmota https://tasmota.github.io/docs/devices/Sonoff-iFan03/

FYI, upcoming Home Assistant Core release 2022.8.7 will contain an updated zigpy-zigate library with some changes for GPIO: https://github.com/home-assistant/core/pull/77125 > Bump ZHA dependencies: > > - zigpy from 0.49.1 to...

@hickeng Why is VIC/VCH deploying to SDRS (Storage DRS) clusters not supported by the way? OK that VIC is still only Alpha now, but IMHO it needs to support SDRS...