Halbelunge

If this will be merged, the fork of the display driver can be deleted

Yes it sadly does a short flicker every ~2 Minutes even if all is fine. The problem till here is, that we have no indicator softwarewise to see if the...

Yes to have a config option might be good. This problem wasnt Natenom exclusive anymore. I programmed this after Markus reported this with one of the 00.03 devices.

I dont think this would be easy to track down with an oszilloscope. You have to find the problematic Signal AND the luck that the 20pF of the probe doesnt...

I dont think this would be easy to track down with an oszilloscope. You have to find the problematic Signal AND the luck that the 20pF of the probe doesnt...

All what you wrote to the capacitence stuff is right, I checked and calculated this stuff some months ago too, and came to similar results. But with some different informations....

Ahh yes, I didnt imported the netlist to the pcb. I have that value layer hidden most of the time. Douh! This is just the combination of an I2C buffer...

Maybe I can take the schematic from the pcb development, remove everything that is additional and post this schematic? Will not be a direkt wiring but it shows all connections....

Maybe I can take the schematic from the pcb development, remove everything that is additional and post this schematic? Will not be a direkt wiring but it shows all connections....

I had the same question for my device with sailfish. So I checked the program code. This can be found in the Heater.hh and Heater.cc: enum HeaterFailMode{ HEATER_FAIL_NONE = 0,...