openHASP
openHASP copied to clipboard
Infinite rebooting of esp32-s3-4848s040 for 0.7.0
Perform all steps below and tick them with [x]
- [x] Check the related part of the Documentation
- [x] Update openHASP to the latest version
- [x] Reproduce the issue and describe all steps
Describe the bug
Same as https://github.com/HASwitchPlate/openHASP/discussions/738. But for board esp32-s3-4848s040
.
The logs shows that code can crash at the random point. The last line is always ESP-ROM:esp32s3-20210327
. However the second one from the bottom could be:
[1000D[0KPrompt > [1000D[9C[ 1.367][131060/141444 7][58564/58568 1] HASP: Loading /pages.jsonl
[1000D[0KPrompt > [1000D[9C[ 0.624][204788/216896 5][ 0/ 0 0] TFT : Started
[1000D[0KPrompt > [1000D[9C[ 1.330][131060/141444 7][61576/61592 1] LVGL: Started
or any line around those moment.
With WIFI SSID ICMA
config:
Without -DUSE_CONFIG_OVERRIDE
:
The hardware I used is a esp32-s3-4848s040 board with only ESP32-S3 WROOM-1-N16R8 and 480*480 LCD. No other components installed on the PCB. I use a TTL module with CH343 to upload code.
I have tried this hardware with ArduinoGFX demo LVGL_Arduino_v9
. The hardware works good.
To Reproduce
I tried both the firmware https://nightly.openhasp.com/firmware/esp32-s3-4848s040_full_16MB_v0.7.0-rc12_cd34d89.bin
and firmware compiled locally with Commit Hash: bbd96b2. Both of them has the same issue.
I tried to touch the screen during the booting just as https://github.com/HASwitchPlate/openHASP/discussions/738 suggest. But it doesn't not help.
Only codes modified are user_setups/esp32s3/*.ini
and 'esp32-s3-4848s040_16MB' in platformio_override.ini
; USAGE: Copy this file and rename it to platformio_override.ini
;
; The platformio_override.ini file is not overwritten or monitored by git
; ONLY edit platformio_override.ini to make local changes to the parameters
[platformio]
extra_configs =
; Uncomment or edit the lines to show more User Setups in the PIO sidebar
; user_setups/darwin/*.ini
; user_setups/esp32/*.ini
; user_setups/esp32s2/*.ini
user_setups/esp32s3/*.ini
; user_setups/linux/*.ini
; user_setups/stm32f4xx/*.ini
; user_setups/win32/*.ini
[override]
; -- Hasp config options --------------------------------------
build_flags =
; -- Uncomment the next line to use the file include/user_config_override.h settings
; -DUSE_CONFIG_OVERRIDE
;region -- Default Build Environments : Used when Build All ---
extra_default_envs =
; Uncomment specific environments or create extra:
; az-touch-mod-esp32_ili9341_4MB
; az-touch-mod-esp32_ili9341_8MB
; d1-mini-esp32_ili9341
; d1-r32-unoshield_ili9341_adc
; d1-r32-unoshield_ili9486_adc
; d1-r32-waveshare_ili9486
; esp32s2-featherwing-24-v2
; esp32s2-featherwing-35-v2
; esp32-2432s028r_4MB
; esp32-3248s035c_4MB
; esp32-3248s035c_4MB_lovyan
; esp32-3248s035r_4MB
; esp32-one_ili9486
; esp32-one_st7796
; esp32-s3-4827s043c_16MB
; esp32-s3-4827s043r_16MB
esp32-s3-4848s040_16MB
; esp32-s3-8048s043c_16MB
; esp32-touchdown
; freetouchdeck_4MB
; freetouchdeck_8MB
; freetouchdeck-s3_8MB
; gs-t3e_16MB
; huzzah32-featherwing-24
; huzzah32-featherwing-24-v2
; huzzah32-v2-featherwing-24-v2
; huzzah32-featherwing-35
; huzzah32-featherwing-35-v2
; huzzah32-v2-featherwing-35-v2
; lanbon_l8
; lanbon_l8_eth
; lilygo-lily-pi_ili9481
; lilygo-lily-pi_st7796
; lolin-d32-pro_ili9341
; m5stack-core2
; m5stack-tough
; makerfabs-s3-tft35-spi
; makerfabs-tft35-cap_16MB
; makerfabs-tft35-cap_4MB
; makerfabs-tft-s2_ili9488
; nodemcu32s-raspi
; s2-mini-esp32s2_ili9341
; ttgo_esp32_poe-ili9341
; lilygo-lily-pi_ili9481
; lilygo-lily-pi_st7796
; ttgo-t7-v1_5_ili9341_16MB
; ttgo-t7-v1_5_ili9341_4MB
; ttgo-esp32_tdisplay_v1
; wt32-sc01_16MB
; wt32-sc01_4MB
; wt32-sc01-plus_16MB
; wt32-sc01-plus_8MB
; wt-86-32-3zw1
; yeacreate-nscreen32
; wz2432r028
; ws_esp32_s3_touch_lcd_4p3
;endregion
;region -- Define your local COM ports for each environment ---
[env:d1-mini-esp32_ili9341]
monitor_port = COM6 ; Change to the correct port
upload_port = ${env:d1-mini-esp32_ili9341.monitor_port}
[env:esp32dev-mrb3511]
monitor_port = COM3 ; Change to the correct port
upload_port = ${env:esp32dev-mrb3511.monitor_port}
[env:az-touch-mod-esp32_ili9341_4MB]
upload_port = COM16
monitor_port = COM16
[env:az-touch-mod-esp32_ili9341_8MB]
upload_port = COM16
monitor_port = COM16
[env:d1-r32-unoshield_ili9486_adc]
monitor_port = COM5
upload_port = COM5
[env:d1-r32-unoshield_ili9341_adc]
;upload_protocol = espota ; Use ArduinoOTA after flashing over serial
;upload_port = 192.168.0.4 ; IP of the ESP
;upload_flags = --port=3232 ; --auth=haspadmin ; OTA password
monitor_port = COM5
upload_port = COM5
[env:esp32-one_st7796]
upload_port = COM6 ; Change to the correct port
monitor_port = COM6 ; Change to the correct port
[env:lolin-d32-pro_ili9341]
monitor_port = COM5 ; Change to the correct port
upload_port = ${env:lolin-d32-pro_ili9341.monitor_port}
;endregion
[env:ttgo_esp32_poe-ili9341]
monitor_port = COM9 ; Change to the correct port
;upload_port = ${env:ttgo_esp32_poe-ili9341.monitor_port}
;upload_port = 192.168.4.5 ; IP of the ESP
;upload_protocol = espota ; Use ArduinoOTA after flashing over serial
upload_flags = --port=3232 ; --auth=haspadmin ; OTA password
;region -- Custom Environment configuration example -----------------
[env:my_custom_build]
extends = arduino_esp32_v2, flash_4mb
board = nodemcu-32s
upload_port = COM12 ; To change the port, use platform_override.ini
monitor_port = COM12 ; To change the port, use platform_override.ini
debug_tool = esp-prog
debug_init_break = tbreak setup
build_flags =
${env.build_flags}
${esp32.build_flags}
;region -- TFT_eSPI build options -----------------------------------
${lcd.lolin24}
${esp32.vspi} ; Use VSPI hardware SPI bus
-D TFT_DC=5
-D TFT_CS=26
-D TFT_RST=-1 ; RST
-D TFT_BCKL=22 ; None, configurable via web UI (e.g. 21)
-D TOUCH_CS=17 ; (can also be 22 or 16)
; -- Options ----------------------------------------
-D HASP_USE_TELNET=1
;endregion
;endregion
Expected behavior
Start normally.
Screenshots or video
None.