XiaomiXiaofangFirmware

XiaomiXiaofangFirmware copied to clipboard

Hi, I have problems getting the cam to connect to local wifi after changing using Sonix GUI @ 192.168.1.1.... How is that done? I can see and connect to FangWifi,...

mikkel75

Revert to Stock

5

Can it be done and if so how .

kslmgd

Lamp doesn't turn on in low light.

sshaikh

Hangs from time to time

1

Although on the whole the fw works wonders, I have the following issue: 1) at random times the camera will stop providing a stream. 2) a reboot fixes this, but...

sshaikh

Not sure if onvif is working, if yes, which port?

trilu2000

wpa_supplicant cannot connect

1

Hi, I'm trying to use wpa_supplicant to connect to my wifi but I get the following error: ``` Successfully initialized wpa_supplicant rfkill: Cannot get wiphy information ioctl[SIOCSIWMODE]: Operation not supported...

maxpowel

It's not important. As this firmware is not of any use (at this moment).

GrumpyMeow

snx_nvram module is missing

3

GrumpyMeow

/media/mmcblk1p1 # insmod snx_nvram.ko sonix_nvram_init kernel BUG at /home/dev/pwnhack/SN986_1.60_QR_Scan_019a_20160606_0951/snx_sdk/kernel/linux-2.6.35.12/src/arch/arm/mm/dma-mapping.c:415! Unable to handle kernel NULL pointer dereference at virtual address 00000000 fcse pid: 7, 0x0e000000 pgd = c3f44000 [00000000] *pgd=03ddf031, *pte=00000000,...

GrumpyMeow

Xiaomi uses mtd4 for JFFS2. SDK uses MTD3

1

Better is to make this eqeual

GrumpyMeow