RTS-GMLC
RTS-GMLC copied to clipboard
GridMod
Reliability Test System - Grid Modernization Lab Consortium
The nuclear unit ramp rate is given as 20 MW/min, about 5x higher than the comparably-sized gas CCs and coal units. Is that intentional?
Hello, Are the loads in REAL_TIME_regional_Load.csv supposed to work with the grid network specified in RTS_GMLC.m? I was trying to solve an ACOPF with a grid network from RTS_GMLC.m and...
I plan to improve the file structure of this repo. A proposal for the new structure follows: - src # scripts for tool specific data conversion - data # the...
From @crphilbrick > PROBLEM: Real-time (RT) loads for Area 1 are approximately 140 MW lower than day-ahead (DA) loads in all hours. Also, RT loads show a significant dip at...
From @crphilbrick: > PROBLEM: Steam units have commitment constraints and costs that make it impossible to commit the generator in day ahead (DA) or that cannot be accurately managed in...
From @crphilbrick: >PROBLEM: Gas CTs have significantly worse commitment constraints than oil-fired CTs. > >RESOLUTION: Exchanged commitment data for oil-fired and gas-fired CTs. > >JUSTIFICATION: Gas-fired CTs are more flexible...
Suggestion from Russ Philbrick: make a unit table where consistent parameters across units are collected in a concise table
There are number of hours in RTS_Data/timeseries_data_files/WIND/DAY_AHEAD_WIND.csv that have unreasonably high forecast errors. The worst two hours are Date, Time, Forecast, Observed total (from REAL_TIME_wind.csv) 2020-02-27, 19:00:00, 0.1, 1918.03333333333 2020-03-05,...
according to this report: https://www.nrel.gov/docs/fy12osti/55433.pdf
