GregValiant
GregValiant
Hi Aldo. This came up on one of the forums (Reddit?). I was not able to reproduce it then but it came up today on a "One at a Time"...
### Is your feature request related to a problem? There have been a number of complaints in regards to "USB Printing" polling serial devices that are not printers, and causing...
Bug fix for "remaining_time". Affected M118 and M73_time Bug was pointed out in #18766 # Description This repairs a problem with M118 lines being added if "remaining_time" was not selected....
Complete Rewrite of Retract Continue. I'll leave this as a draft. @HellAholic , this is another one I'm not really sure where it should go. The Slic3R clones have this...
I've always found Z-hops as a necessary evil, but rarely for an entire file. This script allows the user to customize Z-hops in the Gcode for either particular layers, or...
### Cura Version 5.10.0 ### Operating System Windows 10 Pro ### Printer Ender 3 Pro ### Reproduction steps Adjust the "Infill Layer Thickness to 2X Layer Height. Slice the model....
The concentric infill is kind of OK. When the top layers go on they often fall through the cracks unless the infill is dense (especially if the top is also...
This version creates a "machine_name.skew.log" file to record the skew settings. The settings are machine specific and load every time the script loads and update every time the script runs....
A lot of changes to bring it up to 5.x settings. Fixed "by Height" to work with Z-hops and Adaptive Layers. Split the speed changes into Print, Print+Travel, and Retraction...
This is from a complaint on Reddit about the nozzle leaving a divot while it waits for the M109 to finish heating. This PR adds a relative Z+10 move prior...