GregValiant

Thanks for the report. Slicing with both "Normal" supports and with "Tree" supports the model sliced for me without a problem.  So on my Win 10 Pro system and...

On that particular model - if you print it upside down the inside will need to be full of supports to hold up the roof (the bottom of the pot)....

Thanks for looking. Hole Horizontal Expansion at 0.10 with the Max Hole Diameter at 0.0 caused the problem. The model on the right has a "Per Model" Max Hole Diameter...

Another clear cut case of "Everything affects everything". @HellAholic it appears that a "Max Hole Diameter" of .001 does make the wall problem go away, but a value of about...

Thanks for the report. I didn't have any trouble slicing the model and the model doesn't seem to have any errors. You attached a 3mf model file so I didn't...

I've gone over the StartUp Gcode of numerous multi-extruder machines. Some are "conventional" multi-extruder machines, some are multi-extruders with mixing hot ends and a shared heater, and some are IDEX...

Have you tried enablling "Optimize Wall Printing Order"? It was designed to allow both the inner and outer walls in an area to complete before moving to another area. You...

Without a project file we have nothing to look at to investigate.

I fool around with post-processors and there is a new one in Cura 5.7 called "Advanced Cooling Fan Control". It's one of mine. Something like it had been a "Feature...

Thanks for the report. I went back to 4.13.1 and the Rename Dialog had a 40 character limit there but other dialogs and text boxes that used the Profile Name...