Fast Charge by yank555-lu

[ShinySide]

Know you already have force_fast_charge but these other options would be nice too

/*

• Forced Fast Charge - SysFS interface :

---

• /sys/kernel/fast_charge/force_fast_charge (rw) *
• 0 - disabled (default)
• 1 - substitute AC to USB
• 2 - use custom mA configured through sysfs interface (see below)

• /sys/kernel/fast_charge/use_mtp_during_fast_charge (rw) *
• 0 - disabled
• 1 - enabled (default)

• /sys/kernel/fast_charge/screen_on_current_limit (rw) *
• 0 - disabled
• 1 - enabled (default)

• /sys/kernel/fast_charge/ac_charge_level (rw) *
• rate at which to charge when on AC (1.0A/h to 2.1A/h)

• /sys/kernel/fast_charge/usb_charge_level (r/w) *
• rate at which to charge when on USB (0.460A/h to 1.0A/h)

• /sys/kernel/fast_charge/wireless_charge_level (r/w) *
• rate at which to charge when on WIRELESS (0.650A/h to 1.2A/h)

• /sys/kernel/fast_charge/failsafe (rw) *
• 0 - disabled - allow anything up to 2.1A/h to be used as AC / USB custom current
• 1 - enabled - behaviour as described above (default)

• /sys/kernel/fast_charge/ac_levels (ro) *
• display available levels for AC (for failsafe enabled mode)

• /sys/kernel/fast_charge/usb_levels (ro) *
• display available levels for USB (for failsafe enabled mode)

• /sys/kernel/fast_charge/wireless_levels (ro) *
• display available levels for WIRELESS (for failsafe enabled mode)

• /sys/kernel/fast_charge/version (ro) *
• display fast charge version information

• /sys/kernel/fast_charge/info (ro) *
• display complete fast charge configuration in human readable format

*/

[joesasg]

Still no luck here? Synapse supports this...

[salimusemahu]

Im a newbe.. Must write this or just copy paste to build promp Thanks a lot..

/*

Forced Fast Charge - SysFS interface : -------------------------------------- * /sys/kernel/fast_charge/force_fast_charge (rw) * 0 - disabled (default) 1 - substitute AC to USB 2 - use custom mA configured through sysfs interface (see below) * /sys/kernel/fast_charge/use_mtp_during_fast_charge (rw) * 0 - disabled 1 - enabled (default) * /sys/kernel/fast_charge/screen_on_current_limit (rw) * 0 - disabled 1 - enabled (default) * /sys/kernel/fast_charge/ac_charge_level (rw) * rate at which to charge when on AC (1.0A/h to 2.1A/h) * /sys/kernel/fast_charge/usb_charge_level (r/w) * rate at which to charge when on USB (0.460A/h to 1.0A/h) * /sys/kernel/fast_charge/wireless_charge_level (r/w) * rate at which to charge when on WIRELESS (0.650A/h to 1.2A/h) * /sys/kernel/fast_charge/failsafe (rw) * 0 - disabled - allow anything up to 2.1A/h to be used as AC / USB custom current 1 - enabled - behaviour as described above (default) * /sys/kernel/fast_charge/ac_levels (ro) * display available levels for AC (for failsafe enabled mode) * /sys/kernel/fast_charge/usb_levels (ro) * display available levels for USB (for failsafe enabled mode) * /sys/kernel/fast_charge/wireless_levels (ro) * display available levels for WIRELESS (for failsafe enabled mode) * /sys/kernel/fast_charge/version (ro) * display fast charge version information * /sys/kernel/fast_charge/info (ro) * display complete fast charge configuration in human readable format * */