André
André
Version: 1.15.0 Thank you.
I've tried with the latest Android version, setting the MBR size to 0 but still no success. Still loops between "Waiting for bootloader" and "Connecting to URT", flashing briefly "Initializing...
I've replicated you step-by-step and can get to "Initializing DFU process" and then "Transmiting application do URT". After a few seconds, I get "Upload failed: DFU DEVICE DISCONNECTED". EDIT: Watching...
I've replicated all the steps on a bare Uno with an Adafruit BLE breakout using the example sketch of the ble_uart_project_with_dfu_template . Bootloader is correctly flashed, verified by dumping it...
After I erase the EEPROM, the process can get up to the "Transmitting application to URT". It sends a few packets and then stalls and reports again the "DEVICE DISCONNECTED"....
There was a hardware fault on the custom board that prevented the nRF8001 from doing a proper reset, hence it artificially maintained the same connection once it was on the...
I agree, this must-have feature. I'm dabbling on some experiments to implement it, but I am unfamiliar with this internal-shell approach of the code.
Did some quick and dirty tests, my local build of KeePassWin remembers my password on runtime only and asks for Hello Authentication to use said stored password, with no extra...
Ok, I did a bit of digging and came up with this: https://github.com/twsouthwick/KeePassWin/pull/61 Let me know your thoughts.
Yes, a nice preview for images and simple export file are features needed, if KeePassWin wants to be able to fully replace KeePass old-school.