Courser

The https://curlconverter.com website generates a dict by default, like this.  But vscode generates a tuple. 

I read this, but couldn't the old curlconverter version change params to dict?

我的debian12装好了,按照 https://github.com/remote-android/redroid-doc/blob/master/deploy/debian.md 这个部署文件,上半部分说的加载模块 ``` modprobe binder_linux devices=binder1,binder2,binder3,binder4,binder5,binder6 chmod 666 /dev/binder* ``` 这个虽然能启动容器,但adb连接会offline 所以只能按下半部分说的,编译进内核就不用挂载binder了,内核添加如下配置 ``` CONFIG_ANDROID_BINDER_IPC=y CONFIG_ANDROID_BINDERFS=y CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder" ``` 编译成功并安装后,直接启动容器,adb,scrcpy都连接正常,我用的arm64的机器,同时4核编译用时1个多小时

I forked this project and modified it for TV UI https://github.com/GitCourser/AListLiteTV

这和网络无关啊,就是我的电脑上,调用chromium打开网页就慢,但调用chrome就很快

应该不是, cpu,python,chrome,chromium都是x64的

Indeed, the button below the chat dialog should be "Model Selection" rather than just being able to view the "Model Name" functionality; several people have raised this issue. https://github.com/Kilo-Org/kilocode/issues/3686 https://github.com/Kilo-Org/kilocode/discussions/4037

This isn't called bypass; since you allow VPNs, all traffic passing through the VPN is permitted.