Gideon

> BTW: "cP\x0D" (read it with C rules) is a valid command with a cr "inside" (at the end). So even this character cannot be used for separating commands. Another...

Are we sure that this is not a bug that has been introduced with 3.11? Some control characters have been changed in the communication between the IEC communication layer and...

I already stood corrected by Markus. :-) Just the compare with 6F? Hmm... doesn't feel right. I think the issue should be solved in a more fundamentally correct manner.

I tried to replicate this by issuing wput commands from the command line, and was unable to reproduce it. However, there is always a bit of time between the commands...

Can confirm. It seems that the telnet port is not correctly closed. The 12th telnet connection fails. Always. (Tried with 3.10a) The 11th telnet connection fails. Always. (Tried with 3.11-alpha)...

Well, in this case it is progress made on the definition of the RiscV infrastructure. zicsr is no longer part of the RV32I definition, so in fact, it is correct...

I tested this with my version of the compiler (riscv32-unknown-elf-gcc (GCC) 10.2.0), and this architecture specification does not work yet. So I'll leave it like this for now.

It is probably a bug in the emulation. But I don't know the BB9 well enough to understand where these glitches are coming from. I saw them also in the...

I fixed the freeze button issue. The same issue causes problems in the U64 when switching cartridges.

Comparing a hardware implementation and a software implementation might put us on the wrong track. It might help to check if the basic logic is correct; but that actually already...