Improve liquid nuclear reactor IC2.

[Pilad]

Your GTNH Discord Username

Pilad

Your Pack Version

2.6.0

Your Proposal

In the modpack, the nuclear reactor multiplier is 5. Gregtech also gives a multiplier of 2. As a result, the reactor multiplier is 10. The liquid nuclear reactor's multiplier remained silent. Initially, the efficiency of a liquid nuclear reactor is 2 times higher than that of a nuclear reactor. That is, for balance in the modpack, a liquid nuclear reactor should have a multiplier of 20. A liquid nuclear reactor with a maximum output circuit produces heat of approximately 1200-1400 heat units per second. The reactor produces the same amount of hot coolant. That is, 1200-1400 l/s. The reactor tank capacity is 10,000 l. If the multiplier is 20, then the capacity of the reactor tank should be 1200 * 20 = 24000 l. In its current state, the reactor will not be able to store such amounts of cold and hot agent. I propose to add the capacity of the reactor tank to the configuration file. Then it will be possible to set, for example, 30000l. This will be enough for a reactor multiplier of 20.

Your Goal

Will help you adjust the balance between the two types of nuclear reactors.

Your Vision

This change will improve the attitude towards liquid nuclear reactors as they will become better than dry nuclear reactors. As the authors of mod industrialcraft2 intended.

Final Checklist

• [X] I have searched this issue tracker and there is nothing similar already. Posting on a closed issue saying I like this feature please reconsider adding it will prompt us to investigate and reopen it once we confirm your report.
• [X] I believe there is nothing similar in the pack already, or the existing solution isn't good enough.
• [X] I understand this change request may not attract enough attention and thus not be implemented.
• [X] I understand this change request may be rejected due to other community members thinking it's inappropriate.
• [X] I believe this feature would make the pack better.

[HoleFish]

Multiplier is applied in heat exchanger.

[Pilad]

Multiplier is applied in heat exchanger.

If we compare a dry and liquid nuclear reactor with the same number of rods, the liquid nuclear reactor loses in complexity and energy. That is, we need a heat exchanger and two more turbines. And in the end, it is easier to make a dry nuclear reactor than to make an installation from a reactor, a heat exchanger and two turbines.

[github-actions[bot]]

This issue is stale because it has been open 90 days with no activity. Remove stale label or comment or this will be closed in 3 days