dynamips
dynamips copied to clipboard
GNS3
clock is lost when router is reloaded despite saving config
From @swils024 on May 21, 2017 20:29
While doing the Cisco CCNA (200-125) - Pass with GNS3 course on GNS3 Academy, I noticed that a user had commented on one of the NTP videos saying that the clock setting is lost when a router is reloaded. I have replicated the issue and despite saving the config before the reload, the config was lost. All comments welcome.
Copied from original issue: GNS3/gns3-gui#2075
From @swils024 on May 22, 2017 7:3
Yes using dynamips I was using one of the recommended IOS images.
Regards, Stephen
On 22 May 2017 7:58 a.m., "Julien Duponchelle" [email protected] wrote:
When using dynamips?
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/GNS3/gns3-gui/issues/2075#issuecomment-303015172, or mute the thread https://github.com/notifications/unsubscribe-auth/AVP7vZBPVkhJfSn0zNC0Lsx4wwSehXMkks5r8TIugaJpZM4Nhtur .
