Martin

Results 21 comments of Martin

https://klipper.discourse.group/t/mks-skipr-can-bus/5377

Just for Info, big process on discourse. https://klipper.discourse.group/t/mks-skipr-can-bus/5377/80 we realized that mks used the second can interface on the skipr. Kevin o'Connor had found a little problem on the stm32...

Did you flashed the latest Armbian to your sd/emmc ? https://drive.google.com/drive/folders/1tTuSvF9OL2qtPXElau8YOXn2sWbdxa9e?usp=sharing

Use this pins for your jumper beneath the tmc2209 ![image](https://user-images.githubusercontent.com/34376785/208917933-a8e0491f-54b6-47d0-a214-5614a1fddcc4.png)

> Is your canbus connected to the usb port of the motherboard? The can interface on the motherboard is not supported, you need a usb to can device, connect it...

> her answer by mail https://github.com/makerbase-mks/MKS-THR36-THR42-UTC > > please check it and how is this helping with a SKIPR Board?

https://klipper.discourse.group/t/mks-skipr-can-bus/5377

+1 if i read the schematics correctly, the can bus is on the stm32. so maybe we are never possible to use it with klipper the way we thought to...

https://klipper.discourse.group/t/mks-skipr-can-bus/5377

Just for Info, big process on discourse. https://klipper.discourse.group/t/mks-skipr-can-bus/5377/80 we realized that mks used the second can interface on the skipr. Kevin o'Connor had found a little problem on the stm32...