Frix-x
BTT SB2209 v1.0 incorrect mapping of fans on the toolhead
Klippain branch
- [X] I confirm using the main branch
Version
v4.3.1-11-g4ff6f5b4
Describe the bug and expected behavior
The pin aliases for the part cooling fan and the extruder cooling fan are swapped. Oringinal line is: PART_FAN=MCU_FAN1_PWM , E_FAN=MCU_FAN2_PWM should be PART_FAN=MCU_FAN2_PWM , E_FAN=MCU_FAN1_PWM
Documentation from Bigtreetech shows part fan being connected to fan to VFAN2 and extruder being connected to VFAN1 on the SB0000 daughterboard.
Additional information and klippy.log
No response
thanks for the info! all other SB configs are correct, just the SB2009 (without RPI) was mixed up
📌 This issue has been marked as stale because it has not had activity in the past 30 days. To keep it open, please respond to this message or add new information. Otherwise, this will be closed in 14 days. Thank you for your contributions!
![github-actions[bot] avatar](https://avatars.githubusercontent.com/in/15368?v=4 "Published by a pub.dev verified publisher"){kind=small}
This issue was closed due to inactivity for 14 days. Feel free to reopen it if you think it was an error or if you have new information or progress to share
📌 This issue has been marked as stale because it has not had activity in the past 30 days. To keep it open, please respond to this message or add new information. Otherwise, this will be closed in 14 days. Thank you for your contributions!
This issue was closed due to inactivity for 14 days. Feel free to reopen it if you think it was an error or if you have new information or progress to share