FranzSchi

Hi everyone, is there someone that was able to run Versions on a higer EZSP on Openhab? I've tried in this order Version 6.10.3.0, EZSP version 8 => Starting Version...

Hi @cdjackson, it started, okay lets make it more complex. Yes i had that error with Version 12 therefore i used version 9 and 11. Version 7.3X.0 EZSP version 12...

Can be closed. it was still the old password given in the First Versions STOK hack. BR /Franz

Hi Chris, thanks for that but if the Firmware only supports 460800 in case of HW Flow control? BR /Franz

Hi Chris, thanks for your fast reply, I really appreciate that. I guess we need this properties: tuyaMovingState: { ID: 0xf000, type: dataType_1.default.enum8 }, - Not so critical tuyaCalibration: {...

Hi, just as an info for the others, I've just calibrated my RollerShutter. Replace "20561/1" with your node ID Start Calibration: openhab> zigbee write 20561/1 258 61441 0 ENUMERATION_8_BIT Attribute...

Hi @cdjackson, thanks a lot for your kind support I really appreciate this. It sometimes takes some times for me to understand the technical terms, I hope this answers the...