SP-EUC01 routing errors

[Frans-Willem]

Hello sir, I tested several devices with AqaraHub, such as smar plug (SP-EUC01), Rubik's cube controller and mini switch. The Rubik's cube controller and mini switch can join normally, but after joining the network with smart plug, it will cause a few exceptions:

1. After the smart plug (SP-EUC01) is added, the original network access time is 60s, but it will become longer. After about 3-4 minutes, the log will show that the network access time is over.
2. During this period (3-4 minutes after the smart plug is connected to the network), other devices can access the network, but the way to access the network seems to be similar to the smart plug (SP-EUC01).
3. After 3-4 minutes, the log prints the end of the network connection time, and then the network is turned on again, but no device can be connected. The program can run normally only after restarting.

The above phenomenon was obtained after I carefully and repeatedly verified it. Therefore, I boldly guessed that this problem was caused by the smart plug (SP-EUC01) joining the network due to different processing methods. I added the log of my test to the attachment, including a series of procedures for the device to go online as described above, and a log of all the information that the mqtt subscribes to when the program is running. Among them, I made step instructions. log.zip

Originally posted by @DuanYuXian in https://github.com/Frans-Willem/AqaraHub/issues/59#issuecomment-574589344

[Frans-Willem]

I've attempted to order an SP-EUC01, but was unable to do so. I hope to be able to re-investigate this when the SP-EUC01 will become easier to get hold of.

If anyone is willing to ship me an SP-EUC01 (to the Netherlands), please get in touch: [email protected]

[jian-yu]

i have a SP-EUC01 and add it to the aqarahub successfully, the problem above doesn't happen seemly.

[Frans-Willem]

Thanks for verifying!