Octolapse

Octolapse copied to clipboard

Unable To Enable Custom Preferences (Raspberry Pi HQ)

3

#### If this is a feature request describe it here ___REPLACE_THIS__FEATURE_REQUEST_DESCRIPTION_GOES_HERE #### Version of Octolapse Octolapse Version: 0.4.1 #### Version of OctoPrint OctoPrint Version: 1.7.3 #### When you ran into...

russoj277

[Request] Profile for Anycubic Mega X

1

#### If this is a feature request describe it here Hi, is possible to have profile for Mega-X? Selecting Mega-S profile and changing printing volume sets not correct start and...

gnerpo

Octolapse intermittently taking snapshots. Gphoto2/SonyA6500

3

#### If this is a feature request describe it here Not a Feature Request #### Version of Octolapse Octolapse Version: 0.4.1 #### Version of OctoPrint OctoPrint Version: 1.5.3 #### When...

Buster-Grob

Error in runing test for Octolapse for my nikkon 750 camera in the test of script.

2

#### Version of OctoPrint OctoPrint Version: 0.18.0 #### When you ran into the problem, did you have diagnostic logging enabled? 2021-11-11 03:19:15,037 - octolapse.script - ERROR - Error output (stderr)...

monojuli

Fixed typo in Printer Settings

1

Hi! There are two tabs in Prusa with similar names. One is "Print settings" and the other is "Printer settings". The typo had you going to the wrong tab. It...

benhovinga

Custom Page doesn't recognize Logitech C920 - Unknown Webcam

7

#### If this is a feature request describe it here ___REPLACE_THIS__FEATURE_REQUEST_DESCRIPTION_GOES_HERE #### Version of Octolapse Octolapse Version: 0.4.1 #### Version of OctoPrint OctoPrint Version: 1.6.1 #### When you ran into...

mapotter99

Rendering fails after upgrade to 1.7.0

5

After upgrading to OctoPrint 1.7.0, my time lapses are no longer rendering. They simply remain in the queue. Here is the log message. 2021-10-15 02:14:26,157 - octolapse.render - ERROR -...

speedysk1

Printing randomly freezes when Octolapse is enabled

51

#### If this is a feature request describe it here ___REPLACE_THIS__FEATURE_REQUEST_DESCRIPTION_GOES_HERE #### Version of Octolapse Octolapse Version: v0.4.0 #### Version of OctoPrint OctoPrint Version: 1.4.0 #### When you ran into...

rvarella75

Use new PrusaSlicer/SuperSlicer feature comments (removes need for verbose output)

11

I've been maintaining "verbose" versions of all the default profiles. This probably isn't great if those original profiles are ever updated. It's also not good when I accidentally chose a...

vpicone

Unnecessarily permissive permission setup in instructions

7

I am not a user of octolapse, but I have been involved in the [gphoto](https://github.com/gphoto) project on and off for almost 20 years, and have, in other projects, had a...

ndim