Octolapse icon indicating copy to clipboard operation
Octolapse copied to clipboard

Published 20 hours ago • verified publisher icon FormerLurker

Octolapse on Ender 3 v2 Stringing Issue - Need Help

Open bobster316 opened this issue 3 years ago • 3 comments

Ender 3 v2 Octolapse Version: 0.4.1 Settings Version 0.4.0 OctoPrint Version: 0.18.0 Cura 4.9.1

When you ran into the problem, did you have diagnostic logging enabled?

Diagnostic Logging was Enabled: YES

No corresponding entry in logfile at error occurance

  1. Activating octolapse tab in Octoprint
  2. Klick on button "Renderings ..."

What should have happened? Clean rendered 3d print while using octolapse with no stringing and blobs on the z axis.

What happened instead? Strings and blobs caused by octolapse at the z axis where the print head moves away and back to the print when taking a photo. Same issue if changed from back left, back right, etc.. When printing object without using octolapse there is no issue with the print. This issue began approx 2 weeks ago.

Operating System running OctoPrint and Octolapse OS Name: Octopi Os Version: 0.18.0

Browser and version of browser, operating system running browser Browser: Chrome Browser OS: Windows 10

Link to contents of Javascript console in the browser Not sure how to do this

Screenshots and/or videos of the problem: https://youtu.be/4PDp7ZO0iQI https://imgur.com/HqIfcrt https://imgur.com/U0p8Nap https://imgur.com/73pSOFj https://imgur.com/4tXUM9K https://imgur.com/Pvsp8xF

bobster316 avatar Jun 15 '21 07:06 bobster316

I have files for my cura profile and octolapse settings https://drive.google.com/file/d/1UHDWE5CZFa2fsMRKwGsssmEwKpndyPDT/view?usp=sharing https://drive.google.com/file/d/1bMgE-q5Socx1dcOfhpPMwaWt05DPkKia/view?usp=sharing

bobster316 avatar Jun 15 '21 08:06 bobster316

First, have you read this guide? If not, read through that first and pay close attention to the section on cura automatic slicer settings detection, and the g90/g91 influences extruder setting. thanks!

FormerLurker avatar Jun 15 '21 20:06 FormerLurker

Thanks for the advice, i went through all the documentation (hope i didnt miss anything) Tried with cura automatic slicer settings detection, and the g90/g91 influences extruder setting Here a video of the result with tool temp @ 200 and bed temp @ 70 https://www.youtube.com/watch?v=z01HrE5OmMc

bobster316 avatar Jun 18 '21 11:06 bobster316