Octolapse
Octolapse copied to clipboard
FormerLurker
CR-10 Max Profile missing
i'm hoping to use this plugin to create awesome timelapses. Now the thing is, there's plenty CR-10 profiles in the list but not one for the CR-10 Max. So which one do i pick for the optimum result?
@WimVDK,
I haven't forgotten about you, sorry for the delay! I'm working on a few major issues, then will swing around to this. Bug me if you don't hear back in a couple weeks please!
yeah no worries. It was only shortly before the holiday season i got this thing.
Yes, I added this to the milestones, but i will have the profile complete well before release. I'll create something that may work, will post it here, and you can import it and tell me if it works. If there are issues, we will go back and forth until it is perfected. I'll try to get to this today or tomorrow after work. Thanks for the reminder.
sorry for the late response. I don't check github much and i didn't get notified. I see there's no official 0.5.0 release yet. Any way to access it so i can test it?
Hi all , same issue am facing with CR10Max as the profile is not there, tried other profiles but didn't work properly... any help if there is a specific way to add a CR10Max profile.
Thanks in advance
Wanted to drop a quick message here to say I'm looking at adding several new profiles, including this one. Still on the road map, and I will finally have a few weeks free to start working on this again!
Wanted to drop a quick message here to say I'm looking at adding several new profiles, including this one. Still on the road map, and I will finally have a few weeks free to start working on this again!
@FormerLurker All the best , really cant wait for this, i just upgraded my CR10 MAX with Dragon hotend , and have been printing with bigger nozzel nonstop ... cant wait to get your Octolaps involved in recording all of it .. thanks for the effort you are putting into this.
@WimVDK @FormerLurker Just a quick update: I managed to play around with the available profiles and found out that CR10Pro (customized) profile works fine with my CR10MAX ( since they are around the same i guess but bed size differences). i produced some nice laps, i still need to get around the sittings and how i can use octolaps without losing print quality. THANK YOU for the effort you put into this.
@Omranello have you made more progress on your profile since your post? Also keen to get my CR10Max lapsed up 😂 Ender3v2 works like a dream but I'm super keen on larger pieces and my 1mm nozzle!
@silentFred dropped it altogether and used my phone to record, am building my Voron 2.4 so not really giving the laps much attention. I stopped taking laps after I started to get more issues with print quality ,,, been a while not using it so I can't pinpoint the exact issue though atm ... sorry. Please let me know if you got anything .. would love to go back to the laps
@Omranello - sorry to hear than! What was your main quality concern? extra extrusion while the snap is taken?
Will keep in touch if i make progress on the CR10MAX. Perhaps using my Ender3 for social content is as far as I go. Not to keen to risk quality on a 5 day print
it's been just over 2 years since my initial request. Plugin is still on 0.4.1 missing CR-10 Max support...