ArcWelderPlugin
ArcWelderPlugin copied to clipboard
FormerLurker
A plugin for OctoPrint used to convert G0/G1 commands to G2/G3 commands. Reduce the size of your gcode files, and reduce number of gcodes per second sent to your printer.
Looks like a bug, whenever I try to process files with cut circles (for axels, bolts etc.) the STL file is file and the AW processed file looks correct in...
Arc Welder turns the corners it straight lines. [Block Spacer_single.zip](https://github.com/FormerLurker/ArcWelderPlugin/files/5974850/Block.Spacer_single.zip)
 octoprint.plugins.softwareupdate.exceptions.ConfigurationInvalid: Update configuration for arc_welder of type github_release needs all of user, repo and current set and not None 2021-02-22 12:57:31,167 - octoprint.plugins.softwareupdate - INFO - Saved...
Might want to take a look at this issue I just opened over in the MeatPack plugin: https://github.com/scottmudge/OctoPrint-MeatPack/issues/16#issue-812324455 Looks as if it's MeatPack's fault (disabling it cures the issue), but...
Hi all, my problem can be seen in the photo below, you can also have a look at the G-Code-snippet. I'm not sure if this is a problem with ArcWelder,...
The printing layers and percentage complete are off quite a bit. As is the realtime Gcode viewer. I printed a fairly simple model with 100 layers and it showed: Layer:...
I had a print today that came out with two mysterious seams. I've attached a picture with arrows that point to where the seams showed up. If I print the...
Everything is working fine. And the prints are much smoother. I noticed a slow down or sometimes a stutter when I have small arc's. Is this normal or is there...
Can Arc Welder be used on any g-code file? I have a laser cutter that uses the Cohesion3D laserbaord which uses Lightburn software and g-code to run. I also have...
@KenLucke, can you create a separate issue for this and include the terminal output for the first layer? I'm looking at the file right now in simplify 3d, and the...
Metadata
Owner
Metadata
A plugin for OctoPrint used to convert G0/G1 commands to G2/G3 commands. Reduce the size of your gcode files, and reduce number of gcodes per second sent to your printer.