FirmWire
FirmWire copied to clipboard
Published
20 hours ago •
FirmWire
FirmWire
Cannot connect to Jupiter console
When starting firmware with --console cannot kernel*.json file not created
Hi.
When starting firmwire with --console, it usually enoughs to run jupyter console --existing. You are hinting towards an error message encountered during firmwire startup, but without additional logs/infos, it's tough to tell what's going on.
I'm also having this issue.
I'm starting firmwire like so
python3 ./firmwire.py --console --stop https://github.com/grant-h/ShannonFirmware/raw/master/modem_files/CP_G973FXXU3ASG8_CP13372649_CL16487963_QB24948473_REV01_user_low_ship.tar.md5.lz4 --debug
___ __ _
-. .-. | __|(+) _ _ _ _\ \ / /(+) _ _ ___ .-. .-
\ / \ | _| | | '_| ' \ \/\/ / | | '_/ -_) / \ /
'-' '-|_| | |_| |_|_|_\_/\_/ | |_| \___|-' '-'
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A baseband analysis platform
https://github.com/FirmWire
[INFO] firmwire: Downloading https://github.com/grant-h/ShannonFirmware/raw/master/modem_files/CP_G973FXXU3ASG8_CP13372649_CL16487963_QB24948473_REV01_user_low_ship.tar.md5.lz4...
[DEBUG] urllib3.connectionpool: Starting new HTTPS connection (1): github.com:443
[DEBUG] urllib3.connectionpool: https://github.com:443 "GET /grant-h/ShannonFirmware/raw/master/modem_files/CP_G973FXXU3ASG8_CP13372649_CL16487963_QB24948473_REV01_user_low_ship.tar.md5.lz4 HTTP/1.1" 302 0
[DEBUG] urllib3.connectionpool: Starting new HTTPS connection (1): raw.githubusercontent.com:443
[DEBUG] urllib3.connectionpool: https://raw.githubusercontent.com:443 "GET /grant-h/ShannonFirmware/master/modem_files/CP_G973FXXU3ASG8_CP13372649_CL16487963_QB24948473_REV01_user_low_ship.tar.md5.lz4 HTTP/1.1" 200 27040083
[INFO] firmwire: Using cached file CP_G973FXXU3ASG8_CP13372649_CL16487963_QB24948473_REV01_user_low_ship.tar.md5.lz4
[INFO] firmwire.loader: Reading firmware using ShannonLoader (shannon)
[INFO] firmwire.vendor.shannon.loader: SoC <ShannonSOC S5000AP - 20190103> (automatic)
[INFO] firmwire.emulator.patterndb: Searching for patterns in [40010000 - 425579a0]
[INFO] firmwire.emulator.patterndb: Found symbol boot_mpu_table -> 41777400 [CACHED]
[INFO] firmwire.emulator.patterndb: Found symbol boot_setup_memory -> 40415088 [CACHED]
[INFO] firmwire.emulator.patterndb: Found symbol boot_key_check -> 40549f8a [CACHED]
[INFO] firmwire.emulator.patterndb: Found symbol OS_fatal_error -> 4054ccb2 [CACHED]
[INFO] firmwire.emulator.patterndb: Found symbol pal_MemAlloc -> 423916b2 [CACHED]
[INFO] firmwire.vendor.shannon.pattern_handlers: Fixing up TCM region symbol pal_MemAlloc (423916b2 -> 0401581e)
[INFO] firmwire.emulator.patterndb: Found symbol pal_MemFree -> 40cbb1ac [CACHED]
[INFO] firmwire.emulator.patterndb: Found symbol pal_MsgSendTo -> 41155e80 [CACHED]
[INFO] firmwire.emulator.patterndb: Found symbol pal_Sleep -> 40cba1f8 [CACHED]
[INFO] firmwire.emulator.patterndb: Found symbol log_printf -> 405489ae [CACHED]
[WARN] firmwire.emulator.patterndb: Unable to resolve dynamic symbol log_printf2. Functionality may be affected
[INFO] firmwire.emulator.patterndb: Found symbol pal_SmSetEvent -> 4054d5a2 [CACHED]
[INFO] firmwire.emulator.patterndb: Found symbol SYM_EVENT_GROUP_LIST -> 416f93ec [CACHED]
[INFO] firmwire.vendor.shannon.pattern_handlers: Dereference [0x416f93ec] -> 0x418385e8
[INFO] firmwire.emulator.patterndb: Found symbol SYM_TASK_LIST -> 0176f534 [CACHED]
[INFO] firmwire.vendor.shannon.pattern_handlers: Found likely task name: b'GMAC\x00\x00\x00\x00UL', keeping task layout
[INFO] firmwire.emulator.patterndb: Found symbol SYM_SCHEDULABLE_TASK_LIST -> 43a36e68 [CACHED]
[INFO] firmwire.emulator.patterndb: Found symbol SYM_CUR_TASK_ID -> 418385f4 [CACHED]
[INFO] firmwire.emulator.patterndb: Found symbol SYM_FN_EXCEPTION_SWITCH -> 40c71734 [CACHED]
[INFO] firmwire.emulator.patterndb: Found symbol SYM_QUEUE_LIST -> 4013d408 [CACHED]
[INFO] firmwire.emulator.patterndb: Skipping symbol QUIRK_SXXXAP_DVFS_HACK for S5000AP
[INFO] firmwire.emulator.patterndb: Skipping symbol QUIRK_S337AP_SHM_HACK for S5000AP
[INFO] firmwire.emulator.patterndb: Found symbol SYM_LTERRC_INT_MOB_CMD_HO_FROM_IRAT_MSG_ID -> 0000c3a3 [CACHED]
[INFO] firmwire.emulator.patterndb: Found symbol DSP_SYNC_WORD_0 -> 4060e214 [CACHED]
[INFO] firmwire.vendor.shannon.pattern_handlers: Retrieved sync word 0: 141
[INFO] firmwire.emulator.patterndb: Found symbol DSP_SYNC_WORD_1 -> 4060e21a [CACHED]
[INFO] firmwire.vendor.shannon.pattern_handlers: Retrieved sync word 1: 286
[INFO] firmwire.emulator.patterndb: Dynamic symbol resolution took 0.02 seconds
[INFO] firmwire.vendor.shannon.loader: Using blank NV data
[INFO] firmwire.loader: Loading complete
[INFO] firmwire: FirmWire initializing ShannonMachine
[INFO] firmwire.emulator.firmwire: FirmWire workspace <Workspace CP_G973FXXU3ASG8_CP13372649_CL16487963_QB24948473_REV01_user_low_ship.tar.md5.lz4_workspace>
[WARN] firmwire.vendor.shannon.machine: No Ghidra symbol table found. Output will be addresses only
[WARN] firmwire.emulator.firmwire: Memory TOC_BOOT size 0x2e40 is not page aligned. Force aligning
[WARN] firmwire.emulator.firmwire: Memory TOC_BOOT_LOW size 0x2e40 is not page aligned. Force aligning
[WARN] firmwire.emulator.firmwire: Memory TOC_VSS size 0x5e0660 is not page aligned. Force aligning
[WARN] firmwire.emulator.firmwire: Peripheral DSPPeripheral at 0x47389c00 is not page aligned. This may causes crashes
[WARN] firmwire.emulator.firmwire: Peripheral DSPPeripheral size 0x100 is not page aligned. Force aligning
[WARN] firmwire.emulator.firmwire: Memory tim0 size 0x100 is not page aligned. Force aligning
[WARN] firmwire.emulator.firmwire: Memory tim1 start address 0x82008100 is not page aligned. This may causes crashes
[WARN] firmwire.emulator.firmwire: Memory tim1 size 0x100 is not page aligned. Force aligning
[WARN] firmwire.emulator.firmwire: Memory tim2 start address 0x82008200 is not page aligned. This may causes crashes
[WARN] firmwire.emulator.firmwire: Memory tim2 size 0x100 is not page aligned. Force aligning
[WARN] firmwire.emulator.firmwire: Memory tim3 start address 0x82008300 is not page aligned. This may causes crashes
[WARN] firmwire.emulator.firmwire: Memory tim3 size 0x100 is not page aligned. Force aligning
[WARN] firmwire.emulator.firmwire: Memory tim4 start address 0x82008400 is not page aligned. This may causes crashes
[WARN] firmwire.emulator.firmwire: Memory tim4 size 0x100 is not page aligned. Force aligning
[WARN] firmwire.emulator.firmwire: Memory tim5 start address 0x82008500 is not page aligned. This may causes crashes
[WARN] firmwire.emulator.firmwire: Memory tim5 size 0x100 is not page aligned. Force aligning
[WARN] firmwire.emulator.firmwire: Peripheral TCU size 0x100 is not page aligned. Force aligning
~~~ Memory ranges ~~~
00000000 - 00003000 TOC_BOOT_LOW (rwx)
00003000 - 00008000 SPLIT_3000_5000 (r-x)
00100000 - 00120000 MPU23_00100000 (rw-)
04000000 - 04020000 MPU1_04000000 (r-x)
04800000 - 04804000 MPU2_04800000 (rw-)
40000000 - 40003000 TOC_BOOT (rwx)
40003000 - 40010000 SPLIT_40003000_d000 (r-x)
40010000 - 43010000 TOC_MAIN (rwx)
43010000 - 45600000 SPLIT_43010000_25f0000 (rwx)
45600000 - 45700000 NV (rw-)
45700000 - 46000000 MPU3_45700000 (rwx)
46000000 - 46100000 MPU10_46000000 (rw-)
46100000 - 46800000 MPU9_46100000 (rw-)
46800000 - 47000000 MPU11_46800000 (rw-)
47000000 - 47300000 MPU12_47000000 (rw-)
47300000 - 47389c00 SPLIT_47300000_89c00 (rw-)
47389c00 - 4738ac00 DSPPeripheral (<class 'firmwire.vendor.shannon.hw.DSPPeripheral.DSPPeripheral'>)
4738ac00 - 47400000 SPLIT_4738ac00_75400 (rw-)
47400000 - 47780000 MPU14_47400000 (r--)
47780000 - 47800000 MPU15_47780000 (rw-)
47800000 - 47de1000 TOC_VSS (rwx)
47de1000 - 47f00000 SPLIT_47de1000_11f000 (rw-)
47f00000 - 47f14000 abox (<class 'firmwire.vendor.shannon.hw.abox.ShannonAbox'>)
47f14000 - 48000000 SPLIT_47f14000_ec000 (rw-)
48000000 - 4a800000 MPU5_48000000 (rw-)
4a800000 - 4b000000 MPU21_4a800000 (rwx)
4b000000 - 4b200000 MPU22_4b000000 (rwx)
4b200000 - 4b700000 SHM (<class 'firmwire.vendor.shannon.hw.shannoncp.SHMPeripheral'>)
4b700000 - 4b800000 SPLIT_4b700000_100000 (rw-)
4b800000 - 4b900000 MPU7_4b800000 (rw-)
4b900000 - 4c000000 MPU6_4b900000 (---)
50000000 - 51000000 MPU18_50000000 (rw-)
51000000 - 51400000 MPU19_51000000 (rw-)
51400000 - 51600000 MPU20_51400000 (rw-)
80000000 - 80002000 gic (rwx)
80002000 - 81002000 SPLIT_80002000_1000000 (rw-)
81002000 - 81003000 unk_per8 (<class 'firmwire.vendor.shannon.hw.Unknown2Peripheral.Unknown2Peripheral'>)
81003000 - 82000000 SPLIT_81003000_ffd000 (rw-)
82000000 - 82002000 SOC (<class 'firmwire.vendor.shannon.hw.shannonsoc.ShannonSOCPeripheral'>)
82002000 - 82008000 SPLIT_82002000_6000 (rw-)
82008000 - 82008100 SPLIT_82008000_100 (rw-)
82008100 - 82008200 SPLIT_82008100_100 (rw-)
82008200 - 82008300 SPLIT_82008200_100 (rw-)
82008300 - 82008400 SPLIT_82008300_100 (rw-)
82008400 - 82008500 SPLIT_82008400_100 (rw-)
82008500 - 82009500 tim5 (rw-)
82009500 - 8200f000 SPLIT_82009500_5b00 (rw-)
8200f000 - 82010000 TCU (<class 'firmwire.vendor.shannon.hw.shannon_timer.ShannonTCU'>)
82010000 - 83000000 SPLIT_82010000_ff0000 (rw-)
83000000 - 8300a000 SOC_CLK (<class 'firmwire.vendor.shannon.hw.ClkPeripheral.S5000APClkPeripheral'>)
8300a000 - 84000000 SPLIT_8300a000_ff6000 (rw-)
84000000 - 84001000 boot_uart (<class 'firmwire.vendor.shannon.hw.uart.UARTPeripheral'>)
84001000 - 8f900000 SPLIT_84001000_b8ff000 (rw-)
8f900000 - 8f901000 unk_per10 (<class 'firmwire.hw.peripheral.LoggingPeripheral'>)
8f901000 - 8f910000 SPLIT_8f901000_f000 (rw-)
8f910000 - 8f911000 PMIC (<class 'firmwire.vendor.shannon.hw.PMICPeripheral.PMICPeripheral'>)
8f911000 - 8f920000 SPLIT_8f911000_f000 (rw-)
8f920000 - 8f921000 SIPC (<class 'firmwire.vendor.shannon.hw.sipc.SIPCPeripheral'>)
8f921000 - 8fc22000 SPLIT_8f921000_301000 (rw-)
8fc22000 - 8fc23000 usi2 (<class 'firmwire.hw.peripheral.LoggingPeripheral'>)
8fc23000 - 8fc30000 SPLIT_8fc23000_d000 (rw-)
8fc30000 - 8fc31000 usi1 (<class 'firmwire.hw.peripheral.LoggingPeripheral'>)
8fc31000 - 8fc60000 SPLIT_8fc31000_2f000 (rw-)
8fc60000 - 8fc61000 usi3 (<class 'firmwire.hw.peripheral.LoggingPeripheral'>)
8fc61000 - 8fd20000 SPLIT_8fc61000_bf000 (rw-)
8fd20000 - 8fd21000 usi4 (<class 'firmwire.hw.peripheral.LoggingPeripheral'>)
8fd21000 - c1800000 SPLIT_8fd21000_31adf000 (rw-)
c1800000 - c1805000 marconi (<class 'firmwire.hw.peripheral.CyclicBitPeripheral'>)
c1805000 - c2000000 SPLIT_c1805000_7fb000 (rw-)
c2000000 - c2001000 marconi2 (<class 'firmwire.hw.peripheral.CyclicBitPeripheral'>)
c2001000 - e0000000 SPLIT_c2001000_1dfff000 (rw-)
e0000000 - e2000000 MPU17_e0000000 (r--)
e2000000 - ec000000 SPLIT_e2000000_a000000 (rw-)
ec000000 - ec001000 glink (<class 'firmwire.hw.glink.GLinkPeripheral'>)
ec001000 - 100000000 SPLIT_ec001000_13fff000 (rw-)
[INFO] firmwire.vendor.shannon.machine: Found RWX region [4b000000 - 4b200000]
Loading libpanda from /usr/local/lib/python3.8/dist-packages/pandare/data
[PYPANDA] Panda args: [/usr/local/lib/python3.8/dist-packages/pandare/data/arm-softmmu/libpanda-arm.so -L /usr/local/lib/python3.8/dist-packages/pandare/data/pc-bios -machine configurable -kernel CP_G973FXXU3ASG8_CP13372649_CL16487963_QB24948473_REV01_user_low_ship.tar.md5.lz4_workspace/ShannonEMU3334_conf.json -gdb tcp::3333 -S -drive if=none,id=drive0,file=CP_G973FXXU3ASG8_CP13372649_CL16487963_QB24948473_REV01_user_low_ship.tar.md5.lz4_workspace/snapshots.qcow2,format=qcow2 -nographic -qmp tcp:127.0.0.1:3334,server,nowait -m 128M -monitor unix:/tmp/pypanda_mwik6tvv9,server,nowait]
[DEBUG] pygdbmi.gdbcontroller: Launching gdb: gdb-multiarch --nx --quiet --interpreter=mi2
[DEBUG] pygdbmi.IoManager: writing: 0-gdb-set target-async on
[DEBUG] pygdbmi.IoManager: {'message': 'thread-group-added',
'payload': {'id': 'i1'},
'stream': 'stdout',
'token': None,
'type': 'notify'}
[DEBUG] pygdbmi.IoManager: {'message': 'done',
'payload': None,
'stream': 'stdout',
'token': 0,
'type': 'result'}
[DEBUG] pygdbmi.IoManager: writing: 1-gdb-set architecture arm
[DEBUG] pygdbmi.IoManager: {'message': None,
'payload': 'The target architecture is assumed to be arm\n',
'stream': 'stdout',
'type': 'console'}
[DEBUG] pygdbmi.IoManager: {'message': 'done',
'payload': None,
'stream': 'stdout',
'token': 1,
'type': 'result'}
[DEBUG] pygdbmi.IoManager: writing: 2-gdb-set arm abi AAPCS
[DEBUG] pygdbmi.IoManager: {'message': 'done',
'payload': None,
'stream': 'stdout',
'token': 2,
'type': 'result'}
[DEBUG] pygdbmi.IoManager: writing: 3-target-select remote 127.0.0.1:3333
[DEBUG] pygdbmi.IoManager: {'message': 'thread-group-started',
'payload': {'id': 'i1', 'pid': '42000'},
'stream': 'stdout',
'token': None,
'type': 'notify'}
[DEBUG] pygdbmi.IoManager: {'message': None,
'payload': 'warning: No executable has been specified and target does not '
'support\n'
'determining executable automatically. Try using the "file" '
'command.',
'stream': 'stdout',
'type': 'log'}
[DEBUG] pygdbmi.IoManager: {'message': None, 'payload': '\n', 'stream': 'stdout', 'type': 'log'}
[DEBUG] pygdbmi.IoManager: {'message': 'thread-created',
'payload': {'group-id': 'i1', 'id': '1'},
'stream': 'stdout',
'token': None,
'type': 'notify'}
[DEBUG] pygdbmi.IoManager: {'message': None,
'payload': '0x00000000 in ?? ()\n',
'stream': 'stdout',
'type': 'console'}
[DEBUG] pygdbmi.IoManager: {'message': 'stopped',
'payload': {'frame': {'addr': '0x00000000',
'arch': 'arm',
'args': [],
'func': '??'},
'stopped-threads': 'all',
'thread-id': '1'},
'stream': 'stdout',
'token': None,
'type': 'notify'}
[DEBUG] pygdbmi.IoManager: {'message': 'connected',
'payload': None,
'stream': 'stdout',
'token': 3,
'type': 'result'}
[DEBUG] pygdbmi.IoManager: writing: 4-data-list-register-names
[DEBUG] pygdbmi.IoManager: {'message': 'done',
'payload': {'register-names': ['r0',
'r1',
'r2',
'r3',
'r4',
'r5',
'r6',
'r7',
'r8',
'r9',
'r10',
'r11',
'r12',
'sp',
'lr',
'pc',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'cpsr',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'',
'sp_usr',
'lr_usr',
'r8_fiq',
'r9_fiq',
'r10_fiq',
'r11_fiq',
'r12_fiq',
'sp_fiq',
'lr_fiq',
'sp_irq',
'lr_irq',
'sp_svc',
'lr_svc',
'sp_abt',
'lr_abt',
'sp_und',
'lr_und',
'spsr_fiq',
'spsr_irq',
'spsr_svc',
'spsr_abt',
'spsr_und']},
'stream': 'stdout',
'token': 4,
'type': 'result'}
PANDA[core]:loading required plugin hooks
PANDA[core]:initializing hooks
[WARN] firmwire.emulator.firmwire: Unable to find symbol for hook log_printf2. Not enabling
[DEBUG] pygdbmi.IoManager: writing: 5-gdb-set $VBAR=0x0
[DEBUG] pygdbmi.IoManager: {'message': 'done',
'payload': None,
'stream': 'stdout',
'token': 5,
'type': 'result'}
[INFO] firmwire.hw.fifo: SHM raw_tx_buff[QUEUE] \x00\x00\x00\x00\x0d\x90\x00\x00 8
[INFO] firmwire.hw.fifo: SHM raw_tx_buff[QUEUE] \x00\x00\x00\x00\x00\x9f\x00\x00 16
[DEBUG] pygdbmi.IoManager: writing: 6-break-insert *0x40549f8a
[DEBUG] pygdbmi.IoManager: {'message': 'done',
'payload': {'bkpt': {'addr': '0x40549f8a',
'disp': 'keep',
'enabled': 'y',
'number': '1',
'original-location': '*0x40549f8a',
'thread-groups': ['i1'],
'times': '0',
'type': 'breakpoint'}},
'stream': 'stdout',
'token': 6,
'type': 'result'}
[INFO] firmwire.vendor.shannon.machine: Disabling task 'SHM'
[INFO] firmwire.vendor.shannon.machine: Creating NOP task at 0x4b004000
[DEBUG] pygdbmi.IoManager: writing: 7-data-read-memory-bytes 1098387424 256
[DEBUG] pygdbmi.IoManager: {'message': 'done',
'payload': {'memory': [{'begin': '0x41780fe0',
'contents': '0000000000000000000000000000000098be444300000000000000000000000000000000acbf3d4026000000000800000d066440000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000',
'end': '0x417810e0',
'offset': '0x00000000'}]},
'stream': 'stdout',
'token': 7,
'type': 'result'}
[DEBUG] pygdbmi.IoManager: writing: 8-data-read-memory-bytes 1098387680 8
[DEBUG] pygdbmi.IoManager: {'message': 'done',
'payload': {'memory': [{'begin': '0x417810e0',
'contents': '0000000000000000',
'end': '0x417810e8',
'offset': '0x00000000'}]},
'stream': 'stdout',
'token': 8,
'type': 'result'}
[DEBUG] pygdbmi.IoManager: writing: 9-data-write-memory-bytes 1098387424 0000000000000000000000000000000098be444300000000000000000000000000000000acbf3d4026000000000800000140004b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
[DEBUG] pygdbmi.IoManager: {'message': 'done',
'payload': None,
'stream': 'stdout',
'token': 9,
'type': 'result'}
[DEBUG] pygdbmi.IoManager: writing: 10-data-write-memory-bytes 1098387680 0000000000000000
[DEBUG] pygdbmi.IoManager: {'message': 'done',
'payload': None,
'stream': 'stdout',
'token': 10,
'type': 'result'}
[INFO] firmwire: Machine initialization time took 0.27 seconds
[INFO] firmwire.vendor.shannon.machine: ==== Task List ====
[INFO] firmwire.vendor.shannon.machine: TASK0: Acpm (0x4103dc47)
[INFO] firmwire.vendor.shannon.machine: TASK1: Default (0x41619e3d)
[INFO] firmwire.vendor.shannon.machine: TASK2: DM (0x40550273)
[INFO] firmwire.vendor.shannon.machine: TASK3: DM_TX (0x405504eb)
[INFO] firmwire.vendor.shannon.machine: TASK4: BDA (0x4165fa5f)
[INFO] firmwire.vendor.shannon.machine: TASK5: CIQD (0x4055094d)
[INFO] firmwire.vendor.shannon.machine: TASK6: CIQD_FE (0x40550965)
[INFO] firmwire.vendor.shannon.machine: TASK7: Background (0x41619e4d)
[INFO] firmwire.vendor.shannon.machine: TASK8: TpTest (0x4161b615)
[INFO] firmwire.vendor.shannon.machine: TASK9: TaskReg (0x40556ba5)
[INFO] firmwire.vendor.shannon.machine: TASK10: DBGUNS (0x4073b83f)
[INFO] firmwire.vendor.shannon.machine: TASK11: DBGCMD (0x4077fb5d)
[INFO] firmwire.vendor.shannon.machine: TASK12: DBGCMD2 (0x4077fb8d)
[INFO] firmwire.vendor.shannon.machine: TASK13: InitPacketHandler (0x4163ac6f)
[INFO] firmwire.vendor.shannon.machine: TASK14: PacketHandler (0x4163a981)
[INFO] firmwire.vendor.shannon.machine: TASK15: PBM (0x416bfb81)
[INFO] firmwire.vendor.shannon.machine: TASK16: DS_PBM (0x416bfb8b)
[INFO] firmwire.vendor.shannon.machine: TASK17: ATI (0x4163cd03)
[INFO] firmwire.vendor.shannon.machine: TASK18: MTI (0x40ee22af)
[INFO] firmwire.vendor.shannon.machine: TASK19: SMS (0x41695f51)
[INFO] firmwire.vendor.shannon.machine: TASK20: CC (0x40e36e33)
[INFO] firmwire.vendor.shannon.machine: TASK21: MM (0x40d18cbb)
[INFO] firmwire.vendor.shannon.machine: TASK22: SM (0x40e0c3b1)
[INFO] firmwire.vendor.shannon.machine: TASK23: SS (0x40f4303d)
[INFO] firmwire.vendor.shannon.machine: TASK24: L1C (0x416092c9)
[INFO] firmwire.vendor.shannon.machine: TASK25: PPP (0x4078f161)
[INFO] firmwire.vendor.shannon.machine: TASK26: GDA (0x41639cdd)
[INFO] firmwire.vendor.shannon.machine: TASK27: CDH (0x407cb8d3)
[INFO] firmwire.vendor.shannon.machine: TASK28: VSUP (0x41635663)
[INFO] firmwire.vendor.shannon.machine: TASK29: VCG (0x407dbecf)
[INFO] firmwire.vendor.shannon.machine: TASK30: VCE (0x407a30cf)
[INFO] firmwire.vendor.shannon.machine: TASK31: SAEL3 (0x415da83f)
[INFO] firmwire.vendor.shannon.machine: TASK32: DS_SAEL3 (0x415daa35)
[INFO] firmwire.vendor.shannon.machine: TASK33: PDNMGR (0x415efff3)
[INFO] firmwire.vendor.shannon.machine: TASK34: SIM (0x40e62fa9)
[INFO] firmwire.vendor.shannon.machine: TASK35: DS_SIM (0x40e62fb5)
[INFO] firmwire.vendor.shannon.machine: TASK36: LteRrm (0x40e18595)
[INFO] firmwire.vendor.shannon.machine: TASK37: LTE_L1LC (0x40cd53fb)
[INFO] firmwire.vendor.shannon.machine: TASK38: LteRrc (0x4122d9d1)
[INFO] firmwire.vendor.shannon.machine: TASK39: LteRrc_DS (0x4122e777)
[INFO] firmwire.vendor.shannon.machine: TASK40: LTEL2LRx (0x40663f97)
[INFO] firmwire.vendor.shannon.machine: TASK41: LTEL2LTx (0x4066bce3)
[INFO] firmwire.vendor.shannon.machine: TASK42: LTEL2TCM (0x0400a0c3)
[INFO] firmwire.vendor.shannon.machine: TASK43: LTEL2IDLE (0x04009ff3)
[INFO] firmwire.vendor.shannon.machine: TASK44: LTEL2HTx (0x40d5b1fb)
[INFO] firmwire.vendor.shannon.machine: TASK45: LTEL2HRx (0x40c3fb65)
[INFO] firmwire.vendor.shannon.machine: TASK46: LTE_TLP (0x4067dd49)
[INFO] firmwire.vendor.shannon.machine: TASK47: LTE_MTM (0x40cd94ed)
[INFO] firmwire.vendor.shannon.machine: TASK48: LTE_DM (0x40bc87c7)
[INFO] firmwire.vendor.shannon.machine: TASK49: EDFS (0x40746333)
[INFO] firmwire.vendor.shannon.machine: TASK50: URRC (0x40eddba3)
[INFO] firmwire.vendor.shannon.machine: TASK51: HSPA_CALIBRATION (0x410ba681)
[INFO] firmwire.vendor.shannon.machine: TASK52: LLC (0x412d7307)
[INFO] firmwire.vendor.shannon.machine: TASK53: GRR (0x41602c75)
[INFO] firmwire.vendor.shannon.machine: TASK54: RLC (0x415ff451)
[INFO] firmwire.vendor.shannon.machine: TASK55: GMAC (0x415ff269)
[INFO] firmwire.vendor.shannon.machine: TASK56: GLAPD (0x41601a1b)
[INFO] firmwire.vendor.shannon.machine: TASK57: SNDCP (0x4080b801)
[INFO] firmwire.vendor.shannon.machine: TASK58: SRM (0x416a3f5d)
[INFO] firmwire.vendor.shannon.machine: TASK59: LCSM (0x416db22f)
[INFO] firmwire.vendor.shannon.machine: TASK60: REG_SAP (0x405b834b)
[INFO] firmwire.vendor.shannon.machine: TASK61: AS_SAP (0x405ba5f7)
[INFO] firmwire.vendor.shannon.machine: TASK62: SMS_SAP (0x405d2633)
[INFO] firmwire.vendor.shannon.machine: TASK63: CC_SS_SAP (0x405c955d)
[INFO] firmwire.vendor.shannon.machine: TASK64: SIM_SAP (0x405bad7b)
[INFO] firmwire.vendor.shannon.machine: TASK65: DBG_SAP (0x406bb41b)
[INFO] firmwire.vendor.shannon.machine: TASK66: DS_REG_SAP (0x405b853b)
[INFO] firmwire.vendor.shannon.machine: TASK67: DS_AS_SAP (0x405ba735)
[INFO] firmwire.vendor.shannon.machine: TASK68: DS_SMS_SAP (0x405d286f)
[INFO] firmwire.vendor.shannon.machine: TASK69: DS_CC_SS_SAP (0x405c97b9)
[INFO] firmwire.vendor.shannon.machine: TASK70: DS_SIM_SAP (0x405bafdb)
[INFO] firmwire.vendor.shannon.machine: TASK71: DS_DBG_SAP (0x406bb5b1)
[INFO] firmwire.vendor.shannon.machine: TASK72: MMC (0x405bb971)
[INFO] firmwire.vendor.shannon.machine: TASK73: MMC_IF (0x4151923b)
[INFO] firmwire.vendor.shannon.machine: TASK74: SR_IF (0x406c548d)
[INFO] firmwire.vendor.shannon.machine: TASK75: LTE_MMC_GL1 (0x416f73c5)
[INFO] firmwire.vendor.shannon.machine: TASK76: USAT (0x416ac071)
[INFO] firmwire.vendor.shannon.machine: TASK77: DS_USAT (0x416ac07b)
[INFO] firmwire.vendor.shannon.machine: TASK78: LTE_TCPIP (0x40731bcd)
[INFO] firmwire.vendor.shannon.machine: TASK79: LTE_SISO_ASYNC (0x40731bcb)
[INFO] firmwire.vendor.shannon.machine: TASK80: IMS_CC (0x406dff51)
[INFO] firmwire.vendor.shannon.machine: TASK81: LPP (0x415ef0a1)
[INFO] firmwire.vendor.shannon.machine: TASK82: SHM [DISABLED]
[INFO] firmwire.vendor.shannon.machine: TASK83: UL2CC (0x412e25d1)
[INFO] firmwire.vendor.shannon.machine: TASK84: UL2DL (0x40a300ab)
[INFO] firmwire.vendor.shannon.machine: TASK85: UL2UL (0x41317b71)
[INFO] firmwire.vendor.shannon.machine: TASK86: UDATA (0x4139ac1b)
[INFO] firmwire.vendor.shannon.machine: TASK87: UBMCTask (0x41384491)
[INFO] firmwire.vendor.shannon.machine: TASK88: ephyFramework (0x415f9f0d)
[INFO] firmwire.vendor.shannon.machine: TASK89: syncTask (0x415fabad)
[INFO] firmwire.vendor.shannon.machine: TASK90: recMailTask (0x415fac09)
[INFO] firmwire.vendor.shannon.machine: TASK91: sendMailTask (0x415fac33)
[INFO] firmwire.vendor.shannon.machine: TASK92: BTL (0x4054e741)
[INFO] firmwire.vendor.shannon.machine: TASK93: CLM (0x40f5e8bd)
[INFO] firmwire.vendor.shannon.machine: TASK94: CLTCP (0x40bfb86d)
[INFO] firmwire.vendor.shannon.machine: TASK95: SecuCh (0x40c7da69)
[INFO] firmwire.vendor.shannon.machine: TASK96: SHUB_MSG (0x40f60d5d)
[INFO] firmwire.vendor.shannon.machine: TASK97: SSH (0x40f53a53)
[INFO] firmwire.vendor.shannon.machine: TASK98: CPCOP (0x40f52693)
[INFO] firmwire.vendor.shannon.machine: TASK99: PROXIMITY (0x40f53615)
[INFO] firmwire.vendor.shannon.machine: TASK100: CMMO (0x40f31a49)
[INFO] firmwire: Starting emulator ShannonEMU3334
==> BOOT
==> HALTED
==> CONSOLE
(?) Connect on another terminal with `jupyter console --existing`
(?) Use `self` to access the machine!
[DEBUG] asyncio: Using selector: EpollSelector
NOTE: When using the `ipython kernel` entry point, Ctrl-C will not work.
To exit, you will have to explicitly quit this process, by either sending
"quit" from a client, or using Ctrl-\ in UNIX-like environments.
To read more about this, see https://github.com/ipython/ipython/issues/2049
To connect another client to this kernel, use:
--existing kernel-429.json
[DEBUG] asyncio: Using selector: EpollSelector
and then starting jupyer in a separate tab like so
jupyter console --existing [ZMQTerminalIPythonApp] CRITICAL | Could not find existing kernel connection file kernel*.json
It looks like firmwire should be writing a kernel-429.json config file. But I doesn't seem to be saved anywhere.
@Miracle-doctor , @chromed-lucy
hi guys.
Remember, you're working in a docker container.
1. Check the docker process list and you can get container id of firmwire.
host $ docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS
36de91227b5e firmwire "/bin/bash" 3 hours ago Up 3 hours```
2. connect your firmwire container.
host $ docker exec -it 36de91227b5e /bin/bash
3. execute jupyter console.
root@36de91227b5e # jupyter console --existing
