pushing/logs failed

[oniii1]

I updated the fingerprint but the node mcu wont still connect to the firebase. In the serial monitor it says that pushing/logs failed:. `//Include Lib for Arduino to Nodemcu #include <SoftwareSerial.h> #include <ArduinoJson.h> #include <ESP8266WiFi.h> // add espwifi to enable wifi connection #include <FirebaseArduino.h> //add firebase library #include <ESP8266HTTPClient.h> //add httpclient to connect esp to data //D6 = Rx & D5 = Tx SoftwareSerial nodemcu(D4, D3); #define FIREBASE_HOST "firebaseio.com/" #define FIREBASE_AUTH "jF3Z3KdpE1iIB9" //secret const char* ssid= "RF96S5"; //provide ssid (wifi name) const char* password = "uchihasasuke"; //wifi password float hum; float temp; //Timer to run Arduino code every 5 seconds unsigned long previousMillis = 0; unsigned long currentMillis; const unsigned long period = 10000;

void setup() { // Initialize Serial port Serial.begin(9600); nodemcu.begin(9600); while (!Serial) continue;

WiFi.begin(ssid, password);

while (WiFi.status() != WL_CONNECTED) { delay(1000); Serial.println("Connecting to WiFi..."); }

Serial.println("WiFi connected"); Serial.println("IP address: "); Serial.println(WiFi.localIP()); Firebase.begin(FIREBASE_HOST, FIREBASE_AUTH); //intialize firebase connection }

void loop() { //Get current time currentMillis = millis();

if ((currentMillis - previousMillis >= period)) {

StaticJsonBuffer<1000> jsonBuffer; JsonObject& data = jsonBuffer.parseObject(nodemcu); if (data == JsonObject::invalid()) { //Serial.println("Invalid Json Object"); jsonBuffer.clear(); return; }

Serial.println("JSON Object Recieved"); Serial.print("Humidity: "); hum = data["humidity"]; Serial.println(hum); Serial.print("Temperature: "); temp = data["temperature"]; Serial.println(temp); Serial.println("-----------------------------------------");

} Firebase.setFloat("Humidity",hum); Firebase.setFloat("Temperature", temp); if (Firebase.failed()) { Serial.print("pushing/logs failed:"); Serial.println(Firebase.error()); return; }

}`