FilePhil

With Artisan you can create cupping profiles and add notes to the profil. By using the "Report Ranking"-Feature you are also able to compare multiple roasting profiles. Please Checkout the...

Hey, Support for the ASF protocol would be awesome. I have found this guide [[#379](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/issues/379)](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/issues/379#issuecomment-653743696) and tried to capture the needed sequences. I used a BitScopeBS05U so i could only...

Hey, yes I found only these Three Pins on the mcu, but i will recheck it tomorow, mabye I missed the Connection. The Data in the ZIP should be PulseView...

Today I got the Logic Analyser and went to work: I checked the MISO and MOSI Pins again and It seems to be that they are connected to the same...

Hey, **I see that some TXs/RXs have 4 channels. Do you confirm?** Yes I habe Seen the New RX with 4 Channels. **Your TX has only 2 channels right?** It...

Okay, I will Try it Later. The Module uses PPM from the TX, mabye I can Simulate the 4. Channel, if it would help?

Okay mabye i have to unbind the RX first to see the Binding.

**Was the RX powered on and in bind mode when you launched the "Binding" capture?** No, You have to first put the TX into Binding Mode than the RX. The...

I tried also to Capture CH3, but on the TX I can only map it to toggle buttons, so full left or full right. [ASF_12MHZ_PulseView_CH3.zip](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/files/14674400/ASF_12MHZ_PulseView_CH3.zip)

Awesome, how fast you managed it. I tested the Firmware: - The Throttle and Steering works, but with heavy stuttering and the Throttle seems not to reach full Throttle. [See...