alterlinux
alterlinux copied to clipboard
Published
20 hours ago •
FascodeNet
FascodeNet
Plymouthが正常に表示されない
起動及び終了時にPlymouthが正常に描画されません（以下とほぼ同じように表示されます）
なお、電源ボタン長押しで終了したあとに一度だけ正常に表示されました。
【環境】
- IN8i-15P1220-C-FEM（ノートPC）
- AlterLinux（KDEを入れています）とWindows 10 Homeデュアルブート
- Operating System: Alter Linux
- KDE Plasma のバージョン: 5.18.4
- KDE Frameworks のバージョン: 5.68.0
- Qt のバージョン: 5.14.2
- カーネルバージョン: 5.6.2-zen1-2-zen
- OS の種類: 64-bit
- プロセッサ: 2 × Intel® Celeron® 3205U @ 1.50GHz
- メモリ: 3.8 GiB of RAM sudo systemctl --version → systemd 244 (244.3-1-arch)
これ以外の情報が必要な場合は追記します。
alter-stableリポジトリのplymouthパッケージを最新のものに更新しました
以下の手順でコマンドを実行してどうなるた確かめてみて下さい
yay -Syy
yay -Syu plymouth
コマンド実行してみましたが、変化はありませんでした・・・。 電源ボタン長押しでの強制終了をもう一度試してみましたが、正常に表示されませんでした。
おそらくPlymouthのバグです。 数回そのように起動できない状態を確認しております。 これらがわの問題ではなくアップストリームの問題と思われます。
以下の環境で正常に表示されました。
- Alter Linux Lxde (Beta1)
- DynaBook t451/46DBS
- Core i5-2430M
- SDカードリーダーに刺したSDカードから起動
- plymouth 0.9.4-7
- systend 244 (244.3-1-arch)
ちょっと危険かもしれないですが、systemdを最新にしてみて下さい
yay -S core/systemd-sysvcompat core/systemd-libs core/systemd multilib/lib32-systemd
一部の環境で一切表示されない問題は 85bfae7aac32bb1418bdd89360992d2ccfae0edb で多少は修正されたかもしれません
ログです。
[main.c:1928] check_logging:checking if console messages should be redirected and logged
[main.c:1937] check_logging:logging will be enabled!
[main.c:2006] initialize_environment:source built on Aug 8 2020
[main.c:2016] initialize_environment:Making sure /var/run/plymouth exists
[main.c:2020] initialize_environment:initialized minimal work environment
[main.c:1784] attach_to_running_session:creating new terminal session
[ply-terminal-session.c:362] ply_terminal_session_attach:ptmx not passed in, creating one
[ply-terminal-session.c:236] open_pseudoterminal:opening device '/dev/ptmx'
[ply-terminal-session.c:242] open_pseudoterminal: opened device '/dev/ptmx'
[ply-terminal-session.c:244] open_pseudoterminal:creating pseudoterminal
[ply-terminal-session.c:252] open_pseudoterminal:done creating pseudoterminal
[ply-terminal-session.c:254] open_pseudoterminal:unlocking pseudoterminal
[ply-terminal-session.c:261] open_pseudoterminal:unlocked pseudoterminal
[ply-terminal-session.c:372] ply_terminal_session_attach:redirecting system console to terminal device
[ply-terminal-session.c:381] ply_terminal_session_attach:done redirecting system console to terminal device
[ply-terminal-session.c:511] ply_terminal_session_start_logging:logging incoming console messages
[main.c:1660] tell_systemd_to_print_details:telling systemd to start printing details
[main.c:712] get_cache_file_for_mode:returning cache file '/var/lib/plymouth//boot-duration'
[main.c:295] load_settings:Trying to load /etc/plymouth//plymouthd.conf
[ply-key-file.c:171] ply_key_file_load_group:trying to load group Daemon
[ply-key-file.c:258] ply_key_file_load_groups:key file has no more groups
[main.c:309] load_settings:Checking if /var/run/plymouth/themes/alter-logo/alter-logo.plymouth exists
[main.c:311] load_settings:/var/run/plymouth/themes/alter-logo/alter-logo.plymouth not found, fallbacking to /usr/share/plymouth/themes/
[main.c:325] load_settings:Splash delay is set to 15.000000
[main.c:337] load_settings:Device timeout is set to 10.000000
[ply-key-file.c:352] ply_key_file_get_value:key file does not have entry for key 'DeviceScale'
[main.c:446] find_system_default_splash:System configured theme file is '/usr/share/plymouth/themes/alter-logo/alter-logo.plymouth'
[main.c:295] load_settings:Trying to load /var/run/plymouth/plymouthd.defaults
[ply-key-file.c:82] ply_key_file_open_file:Failed to open key file /var/run/plymouth/plymouthd.defaults: No such file or directory
[main.c:456] find_distribution_default_splash:failed to load /var/run/plymouth/plymouthd.defaults, trying /usr/share/plymouth//
[main.c:295] load_settings:Trying to load /usr/share/plymouth//plymouthd.defaults
[ply-key-file.c:171] ply_key_file_load_group:trying to load group Daemon
[ply-key-file.c:258] ply_key_file_load_groups:key file has no more groups
[main.c:309] load_settings:Checking if /var/run/plymouth/themes/alter-logo/alter-logo.plymouth exists
[main.c:311] load_settings:/var/run/plymouth/themes/alter-logo/alter-logo.plymouth not found, fallbacking to /usr/share/plymouth/themes/
[ply-key-file.c:352] ply_key_file_get_value:key file does not have entry for key 'DeviceScale'
[main.c:463] find_distribution_default_splash:Distribution default theme file is '/usr/share/plymouth/themes/alter-logo/alter-logo.plymouth'
[main.c:873] plymouth_should_show_default_splash:checking if plymouth should show default splash
[main.c:901] plymouth_should_show_default_splash:using default splash because kernel command line has option "splash"
[ply-device-manager.c:785] create_devices_from_terminals:checking for consoles
[ply-device-manager.c:563] add_consoles_from_file:opening /sys/class/tty/console/active
[ply-device-manager.c:571] add_consoles_from_file:reading file
[ply-device-manager.c:609] add_consoles_from_file:console /dev/tty1 found!
[ply-device-manager.c:385] watch_for_udev_events:watching for udev graphics device add and remove events
[ply-device-manager.c:283] create_devices_for_subsystem:creating objects for drm devices
[ply-device-manager.c:303] create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ply-device-manager.c:310] create_devices_for_subsystem:device is initialized
[ply-device-manager.c:319] create_devices_for_subsystem:found node /dev/dri/card0
[ply-device-manager.c:233] create_devices_for_udev_device:device subsystem is drm
[ply-device-manager.c:236] create_devices_for_udev_device:found DRM device /dev/dri/card0
[ply-device-manager.c:697] create_devices_for_terminal_and_renderer_type:creating devices for /dev/dri/card0 (renderer type: 1) (terminal: /dev/tty1)
[ply-renderer.c:236] ply_renderer_open_plugin:trying to open renderer plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:799] create_backend:creating renderer backend for device /dev/dri/card0
[./plugin.c:178] should_use_preferred_mode:should_use_preferred_mode: 1
[./plugin.c:892] load_driver:Opening '/dev/dri/card0'
[ply-terminal.c:603] ply_terminal_open:trying to open terminal '/dev/tty1'
[ply-terminal.c:396] ply_terminal_refresh_geometry:looking up terminal text geometry
[ply-terminal.c:408] ply_terminal_refresh_geometry:terminal is now 200x56 text cells
[ply-terminal.c:446] get_active_vt:Remembering that initial vt is 1
[./plugin.c:1239] query_device:Could not initialize heads
[ply-renderer.c:249] ply_renderer_open_plugin:could not query rendering device for plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:959] close_device:closing device
[./plugin.c:913] unload_backend:unloading backend
[./plugin.c:824] destroy_backend:destroying renderer backend for device /dev/dri/card0
[ply-renderer.c:287] ply_renderer_open:could not find suitable rendering plugin
[ply-device-manager.c:705] create_devices_for_terminal_and_renderer_type:could not open renderer for /dev/dri/card0
[ply-device-manager.c:303] create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-DP-1
[ply-device-manager.c:310] create_devices_for_subsystem:device is initialized
[ply-device-manager.c:303] create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-DVI-D-1
[ply-device-manager.c:310] create_devices_for_subsystem:device is initialized
[ply-device-manager.c:303] create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-HDMI-A-1
[ply-device-manager.c:310] create_devices_for_subsystem:device is initialized
[ply-device-manager.c:303] create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/renderD128
[ply-device-manager.c:310] create_devices_for_subsystem:device is initialized
[ply-device-manager.c:323] create_devices_for_subsystem:device doesn't have a devices tag
[main.c:2310] main:entering event loop
[ply-device-manager.c:349] on_udev_event:got add event for device card0
[ply-device-manager.c:233] create_devices_for_udev_device:device subsystem is drm
[ply-device-manager.c:236] create_devices_for_udev_device:found DRM device /dev/dri/card0
[ply-device-manager.c:697] create_devices_for_terminal_and_renderer_type:creating devices for /dev/dri/card0 (renderer type: 1) (terminal: /dev/tty1)
[ply-renderer.c:236] ply_renderer_open_plugin:trying to open renderer plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:799] create_backend:creating renderer backend for device /dev/dri/card0
[./plugin.c:178] should_use_preferred_mode:should_use_preferred_mode: 1
[./plugin.c:892] load_driver:Opening '/dev/dri/card0'
[ply-terminal.c:599] ply_terminal_open:terminal /dev/tty1 is already open
[./plugin.c:1239] query_device:Could not initialize heads
[ply-renderer.c:249] ply_renderer_open_plugin:could not query rendering device for plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:959] close_device:closing device
[./plugin.c:913] unload_backend:unloading backend
[./plugin.c:824] destroy_backend:destroying renderer backend for device /dev/dri/card0
[ply-renderer.c:287] ply_renderer_open:could not find suitable rendering plugin
[ply-device-manager.c:705] create_devices_for_terminal_and_renderer_type:could not open renderer for /dev/dri/card0
[ply-device-manager.c:349] on_udev_event:got add event for device card0-DP-1
[ply-device-manager.c:349] on_udev_event:got add event for device card0-DVI-D-1
[ply-device-manager.c:349] on_udev_event:got add event for device card0-HDMI-A-1
[ply-device-manager.c:349] on_udev_event:got add event for device fb0
[ply-device-manager.c:365] on_udev_event:ignoring since we only handle subsystem graphics devices after timeout
[ply-boot-server.c:350] print_connection_process_identity:connection is from pid 239 (/usr/bin/plymouth --show-splash) with parent pid 1 (/usr/bin/ash /init splash)
[ply-boot-server.c:449] ply_boot_connection_on_request:got show splash request
[main.c:843] plymouth_should_ignore_show_splash_calls:checking if plymouth should be running
[main.c:945] on_show_splash:no displays available to show splash on, waiting...
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:350] print_connection_process_identity:connection is from pid 253 (/usr/bin/plymouth update-root-fs --new-root-dir=/new_root) with parent pid 1 (/usr/bin/ash /init splash)
[ply-boot-server.c:660] ply_boot_connection_on_request:got newroot request
[main.c:682] on_newroot:new root mounted at "/new_root", switching to it
[main.c:712] get_cache_file_for_mode:returning cache file '/var/lib/plymouth//boot-duration'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to '-.mount'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'dev-hugepages.mount'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'dev-mqueue.mount'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'sys-kernel-debug.mount'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 12
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'sys-kernel-tracing.mount'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'kmod-static-nodes.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'proc-sys-fs-binfmt_misc.mount'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 12
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-remount-fs.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-binfmt.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-udev-trigger.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-journald.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-random-seed.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-journal-flush.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-modules-load.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'sys-kernel-config.mount'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-tmpfiles-setup-dev.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-sysctl.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-vconsole-setup.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-udevd.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'lvm2-lvmetad.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:350] print_connection_process_identity:connection is from pid 345 (/usr/bin/plymouth show-splash) with parent pid 1 (/sbin/init splash)
[ply-boot-server.c:449] ply_boot_connection_on_request:got show splash request
[main.c:920] on_show_splash:show splash called while already shown
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'plymouth-start.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-device-manager.c:349] on_udev_event:got add event for device fb0
[ply-device-manager.c:365] on_udev_event:ignoring since we only handle subsystem graphics devices after timeout
[ply-device-manager.c:349] on_udev_event:got add event for device card0
[ply-device-manager.c:233] create_devices_for_udev_device:device subsystem is drm
[ply-device-manager.c:236] create_devices_for_udev_device:found DRM device /dev/dri/card0
[ply-device-manager.c:697] create_devices_for_terminal_and_renderer_type:creating devices for /dev/dri/card0 (renderer type: 1) (terminal: /dev/tty1)
[ply-renderer.c:236] ply_renderer_open_plugin:trying to open renderer plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:799] create_backend:creating renderer backend for device /dev/dri/card0
[./plugin.c:178] should_use_preferred_mode:should_use_preferred_mode: 1
[./plugin.c:892] load_driver:Opening '/dev/dri/card0'
[ply-terminal.c:599] ply_terminal_open:terminal /dev/tty1 is already open
[./plugin.c:1239] query_device:Could not initialize heads
[ply-renderer.c:249] ply_renderer_open_plugin:could not query rendering device for plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:959] close_device:closing device
[./plugin.c:913] unload_backend:unloading backend
[./plugin.c:824] destroy_backend:destroying renderer backend for device /dev/dri/card0
[ply-renderer.c:287] ply_renderer_open:could not find suitable rendering plugin
[ply-device-manager.c:705] create_devices_for_terminal_and_renderer_type:could not open renderer for /dev/dri/card0
[ply-device-manager.c:349] on_udev_event:got add event for device card0-DVI-D-1
[ply-device-manager.c:349] on_udev_event:got add event for device card0-DP-1
[ply-device-manager.c:349] on_udev_event:got add event for device card0-HDMI-A-1
[ply-device-manager.c:349] on_udev_event:got add event for device card1
[ply-device-manager.c:233] create_devices_for_udev_device:device subsystem is drm
[ply-device-manager.c:236] create_devices_for_udev_device:found DRM device /dev/dri/card1
[ply-device-manager.c:697] create_devices_for_terminal_and_renderer_type:creating devices for /dev/dri/card1 (renderer type: 1) (terminal: /dev/tty1)
[ply-renderer.c:236] ply_renderer_open_plugin:trying to open renderer plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:799] create_backend:creating renderer backend for device /dev/dri/card1
[./plugin.c:178] should_use_preferred_mode:should_use_preferred_mode: 1
[./plugin.c:892] load_driver:Opening '/dev/dri/card1'
[ply-terminal.c:599] ply_terminal_open:terminal /dev/tty1 is already open
[./plugin.c:1239] query_device:Could not initialize heads
[ply-renderer.c:249] ply_renderer_open_plugin:could not query rendering device for plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:959] close_device:closing device
[./plugin.c:913] unload_backend:unloading backend
[./plugin.c:824] destroy_backend:destroying renderer backend for device /dev/dri/card1
[ply-renderer.c:287] ply_renderer_open:could not find suitable rendering plugin
[ply-device-manager.c:705] create_devices_for_terminal_and_renderer_type:could not open renderer for /dev/dri/card1
[ply-device-manager.c:349] on_udev_event:got add event for device card1-VGA-1
[ply-device-manager.c:349] on_udev_event:got change event for device card1
[ply-device-manager.c:349] on_udev_event:got add event for device card1-HDMI-A-2
[ply-device-manager.c:349] on_udev_event:got change event for device card1
[ply-device-manager.c:349] on_udev_event:got add event for device card1-DP-2
[ply-device-manager.c:349] on_udev_event:got change event for device card1
[ply-device-manager.c:349] on_udev_event:got change event for device card1
[ply-device-manager.c:349] on_udev_event:got change event for device card1
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'dev-disk-by\x2dlabel-SWAP.swap'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'dev-disk-by\x2dpath-pci\x2d0000:00:1f.2\x2data\x2d1\x2dpart13.swap'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 12
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'dev-disk-by\x2dpartuuid-e5e94f90\x2d1469\x2d4976\x2d910e\x2d7a367c259b24.swap'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'dev-disk-by\x2did-ata\x2dWDC_WD40EZRZ\x2d00GXCB0_WD\x2dWCC7K3KJRKHK\x2dpart13.swap'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'dev-disk-by\x2did-wwn\x2d0x50014ee265fa3ed7\x2dpart13.swap'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 12
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'dev-disk-by\x2duuid-4d048e93\x2d7d2e\x2d4a0a\x2d8404\x2d0b426c03372b.swap'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'dev-disk-by\x2dpartlabel-SWAP.swap'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'dev-disk-by\x2dpath-pci\x2d0000:00:1f.2\x2data\x2d1.0\x2dpart13.swap'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 12
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'dev-sda13.swap'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'tmp.mount'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'lvm2-monitor.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'var-lib-snapd-snap-core-9804.mount'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'var-lib-snapd-snap-gravit\x2ddesigner-42.mount'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-fsck@dev-disk-by\x2duuid-329C\x2dEAD6.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-device-manager.c:830] create_devices_from_udev:Timeout elapsed, looking for devices from udev
[ply-device-manager.c:283] create_devices_for_subsystem:creating objects for drm devices
[ply-device-manager.c:303] create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ply-device-manager.c:310] create_devices_for_subsystem:device is initialized
[ply-device-manager.c:319] create_devices_for_subsystem:found node /dev/dri/card0
[ply-device-manager.c:233] create_devices_for_udev_device:device subsystem is drm
[ply-device-manager.c:236] create_devices_for_udev_device:found DRM device /dev/dri/card0
[ply-device-manager.c:697] create_devices_for_terminal_and_renderer_type:creating devices for /dev/dri/card0 (renderer type: 1) (terminal: /dev/tty1)
[ply-renderer.c:236] ply_renderer_open_plugin:trying to open renderer plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:799] create_backend:creating renderer backend for device /dev/dri/card0
[./plugin.c:178] should_use_preferred_mode:should_use_preferred_mode: 1
[./plugin.c:892] load_driver:Opening '/dev/dri/card0'
[ply-terminal.c:599] ply_terminal_open:terminal /dev/tty1 is already open
[./plugin.c:1239] query_device:Could not initialize heads
[ply-renderer.c:249] ply_renderer_open_plugin:could not query rendering device for plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:959] close_device:closing device
[./plugin.c:913] unload_backend:unloading backend
[./plugin.c:824] destroy_backend:destroying renderer backend for device /dev/dri/card0
[ply-renderer.c:287] ply_renderer_open:could not find suitable rendering plugin
[ply-device-manager.c:705] create_devices_for_terminal_and_renderer_type:could not open renderer for /dev/dri/card0
[ply-device-manager.c:303] create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-DP-1
[ply-device-manager.c:310] create_devices_for_subsystem:device is initialized
[ply-device-manager.c:303] create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-DVI-D-1
[ply-device-manager.c:310] create_devices_for_subsystem:device is initialized
[ply-device-manager.c:303] create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-HDMI-A-1
[ply-device-manager.c:310] create_devices_for_subsystem:device is initialized
[ply-device-manager.c:303] create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/renderD128
[ply-device-manager.c:310] create_devices_for_subsystem:device is initialized
[ply-device-manager.c:323] create_devices_for_subsystem:device doesn't have a devices tag
[ply-device-manager.c:303] create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ply-device-manager.c:310] create_devices_for_subsystem:device is initialized
[ply-device-manager.c:319] create_devices_for_subsystem:found node /dev/dri/card1
[ply-device-manager.c:233] create_devices_for_udev_device:device subsystem is drm
[ply-device-manager.c:236] create_devices_for_udev_device:found DRM device /dev/dri/card1
[ply-device-manager.c:697] create_devices_for_terminal_and_renderer_type:creating devices for /dev/dri/card1 (renderer type: 1) (terminal: /dev/tty1)
[ply-renderer.c:236] ply_renderer_open_plugin:trying to open renderer plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:799] create_backend:creating renderer backend for device /dev/dri/card1
[./plugin.c:178] should_use_preferred_mode:should_use_preferred_mode: 1
[./plugin.c:892] load_driver:Opening '/dev/dri/card1'
[ply-terminal.c:599] ply_terminal_open:terminal /dev/tty1 is already open
[./plugin.c:1239] query_device:Could not initialize heads
[ply-renderer.c:249] ply_renderer_open_plugin:could not query rendering device for plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:959] close_device:closing device
[./plugin.c:913] unload_backend:unloading backend
[./plugin.c:824] destroy_backend:destroying renderer backend for device /dev/dri/card1
[ply-renderer.c:287] ply_renderer_open:could not find suitable rendering plugin
[ply-device-manager.c:705] create_devices_for_terminal_and_renderer_type:could not open renderer for /dev/dri/card1
[ply-device-manager.c:303] create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:02.0/drm/card1/card1-DP-2
[ply-device-manager.c:310] create_devices_for_subsystem:device is initialized
[ply-device-manager.c:303] create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:02.0/drm/card1/card1-HDMI-A-2
[ply-device-manager.c:310] create_devices_for_subsystem:device is initialized
[ply-device-manager.c:303] create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:02.0/drm/card1/card1-VGA-1
[ply-device-manager.c:310] create_devices_for_subsystem:device is initialized
[ply-device-manager.c:303] create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:02.0/drm/renderD129
[ply-device-manager.c:310] create_devices_for_subsystem:device is initialized
[ply-device-manager.c:323] create_devices_for_subsystem:device doesn't have a devices tag
[ply-device-manager.c:283] create_devices_for_subsystem:creating objects for frame buffer devices
[ply-device-manager.c:303] create_devices_for_subsystem:found device /sys/devices/platform/efi-framebuffer.0/graphics/fb0
[ply-device-manager.c:310] create_devices_for_subsystem:device is initialized
[ply-device-manager.c:319] create_devices_for_subsystem:found node /dev/fb0
[ply-device-manager.c:233] create_devices_for_udev_device:device subsystem is graphics
[ply-device-manager.c:239] create_devices_for_udev_device:found frame buffer device /dev/fb0
[ply-device-manager.c:189] fb_device_has_drm_device:trying to find associated drm node for fb device (path: platform-efi-framebuffer.0)
[ply-device-manager.c:212] fb_device_has_drm_device:no card entry!
[ply-device-manager.c:697] create_devices_for_terminal_and_renderer_type:creating devices for /dev/fb0 (renderer type: 2) (terminal: /dev/tty1)
[ply-renderer.c:236] ply_renderer_open_plugin:trying to open renderer plugin /usr/lib/plymouth/renderers/frame-buffer.so
[./plugin.c:257] create_backend:creating renderer backend for device /dev/fb0
[ply-terminal.c:599] ply_terminal_open:terminal /dev/tty1 is already open
[./plugin.c:500] query_device:32 bpp (8, 8, 8, 8) with rowstride 8192
[./plugin.c:272] initialize_head:initializing 1600x900 head
[ply-renderer.c:256] ply_renderer_open_plugin:opened renderer plugin /usr/lib/plymouth/renderers/frame-buffer.so
[main.c:993] on_keyboard_added:listening for keystrokes
[main.c:997] on_keyboard_added:listening for escape
[main.c:1001] on_keyboard_added:listening for backspace
[main.c:1005] on_keyboard_added:listening for enter
[ply-device-manager.c:634] create_pixel_displays_for_renderer:Adding displays for 1 heads
[main.c:1047] on_pixel_display_added:pixel display added before splash loaded, so loading splash now
[main.c:963] show_splash:delaying show splash for 4.674831 seconds
[ply-event-loop.c:967] ply_event_loop_stop_watching_for_timeout:no matching timeout found for removal
[ply-device-manager.c:983] ply_device_manager_activate_keyboards:activating keyboards
[ply-terminal.c:396] ply_terminal_refresh_geometry:looking up terminal text geometry
[ply-terminal.c:408] ply_terminal_refresh_geometry:terminal is now 200x56 text cells
[ply-device-manager.c:670] create_text_displays_for_terminal:adding text display for terminal /dev/tty1
[main.c:1074] on_text_display_added:text display added before splash loaded, so loading splash now
[main.c:963] show_splash:delaying show splash for 4.667833 seconds
[ply-device-manager.c:983] ply_device_manager_activate_keyboards:activating keyboards
[ply-device-manager.c:763] create_devices_for_terminal_and_renderer_type:activating keyboards
[ply-device-manager.c:303] create_devices_for_subsystem:found device /sys/devices/virtual/graphics/fbcon
[ply-device-manager.c:326] create_devices_for_subsystem:it's not initialized
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'boot-efi.mount'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 12
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor
[ply-boot-server.c:350] print_connection_process_identity:connection is from pid 639 (/usr/bin/plymouth update-root-fs --read-write) with parent pid 1 (/sbin/init splash)
[ply-boot-server.c:441] ply_boot_connection_on_request:got system initialized notification
[main.c:816] on_system_initialized:system now initialized, opening log
[main.c:1660] tell_systemd_to_print_details:telling systemd to start printing details
[main.c:738] get_log_file_for_state:returning log file '/var/log/boot.log'
[main.c:801] prepare_logging:opening log '/var/log/boot.log'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'plymouth-read-write.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-tmpfiles-setup.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-update-utmp.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-timesyncd.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'dbus.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'alsa-restore.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-machined.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-logind.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'bluetooth.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 14
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 14
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 14
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 14 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'NetworkManager.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 15
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 15
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 15
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 15 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'libvirtd.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-user-sessions.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346] print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401] ply_boot_connection_on_request:got update request
[main.c:211] on_update:updating status to 'systemd-hostnamed.service'
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 14
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 14
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 14
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 14 from epoll watch list: Bad file descriptor
[ply-boot-server.c:350] print_connection_process_identity:connection is from pid 855 (plymouth --ping) with parent pid 829 (/usr/bin/lightdm)
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 14
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 14
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 14
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 14 from epoll watch list: Bad file descriptor
[ply-boot-server.c:350] print_connection_process_identity:connection is from pid 856 (plymouth --has-active-vt) with parent pid 829 (/usr/bin/lightdm)
[ply-boot-server.c:666] ply_boot_connection_on_request:got has_active vt? request
[ply-event-loop.c:1061] ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 14
[ply-event-loop.c:1065] ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 14
[ply-event-loop.c:1144] ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 14
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 14 from epoll watch list: Bad file descriptor
[ply-boot-server.c:350] print_connection_process_identity:connection is from pid 857 (plymouth quit) with parent pid 829 (/usr/bin/lightdm)
[ply-boot-server.c:486] ply_boot_connection_on_request:got quit request
[main.c:1360] on_quit:quitting (retain splash: false)
[main.c:1372] on_quit:system initialized so saving boot-duration file
[ply-utils.c:718] ply_create_directory:directory '/var/lib/plymouth/' already exists
[main.c:712] get_cache_file_for_mode:returning cache file '/var/lib/plymouth//boot-duration'
[ply-progress.c:214] ply_progress_save_cache:saving progress cache to /var/lib/plymouth//boot-duration
[main.c:1668] tell_systemd_to_stop_printing_details:telling systemd to stop printing details
[main.c:1386] on_quit:closing log
[ply-device-manager.c:1005] ply_device_manager_deactivate_keyboards:deactivating keyboards
[ply-event-loop.c:761] ply_event_loop_stop_watching_fd:stopping watching fd 11
[ply-event-loop.c:777] ply_event_loop_stop_watching_fd:removing destination for fd 11
[main.c:1392] on_quit:unloading splash
[main.c:1202] quit_program:cleaning up devices
[ply-device-manager.c:522] ply_device_manager_free:freeing device manager
[ply-terminal.c:672] ply_terminal_close:restoring color palette
[ply-terminal.c:676] ply_terminal_close:stop watching tty fd
[ply-event-loop.c:761] ply_event_loop_stop_watching_fd:stopping watching fd 11
[ply-event-loop.c:777] ply_event_loop_stop_watching_fd:removing destination for fd 11
[ply-event-loop.c:786] ply_event_loop_stop_watching_fd:no more destinations remaing for fd 11, removing source
[ply-terminal.c:682] ply_terminal_close:stop watching SIGWINCH signal
[ply-terminal.c:686] ply_terminal_close:setting buffered input
[ply-renderer.c:92] ply_renderer_free:Unloading renderer backend plugin
[ply-event-loop.c:967] ply_event_loop_stop_watching_for_timeout:no matching timeout found for removal
[main.c:1205] quit_program:exiting event loop
[ply-boot-server.c:314] ply_boot_connection_on_quit_complete:quit complete
[ply-event-loop.c:645] ply_event_loop_remove_source_node:failed to delete fd 7 from epoll watch list: Bad file descriptor
[main.c:2312] main:exited event loop
[ply-boot-splash.c:390] ply_boot_splash_free:freeing splash
[main.c:2322] main:freeing terminal session
[ply-terminal-session.c:535] ply_terminal_session_stop_logging:stopping logging of incoming console messages
[main.c:2328] main:exiting with code 0
私のPCでplymouthが映ったので方法のご紹介。やるのは自己責任で。 https://wiki.archlinux.jp/index.php/Plymouth#.E3.83.86.E3.83.BC.E3.83.9E.E3.81.AE.E5.A4.89.E6.9B.B4 に書いてあることをそのままやっただけなんですが、 /etc/plymouth/plymouthd.conf の DeviceTimeoutの項目を15に設定することで解決しました。この値はもっと少なくてもいいかもしれません。
sed -i -e 's/8/15/g' /etc/plymouth/plymouthd.conf
plymouth-set-default-theme -R alter-logo (念のため)
NVIDIA GPUで動作するようになりました（ビルド時に--add-module nvidiaを追加）
https://twitter.com/Hayao0819/status/1435762502550241281
やっと完全に解決しました https://wiki.archlinux.jp/index.php/Kernel_Mode_Setting#Early_KMS_start をやればいけます。
Early KMS Startを暫定的にLive環境でNVIDIAに対応させました。
ただ、インストール後の環境にも適用させるには新しくmkinitcpio moduleを作成してパッケージングする必要があります。
https://github.com/FascodeNet/alterlinux/commit/d8d1829740e1e848655ac1c15901724b00a856f4